Parting Out 1974 part out (1 Viewer)

[tlc762]

James,
sent a PM on several parts off this truck.
Thanks,
Will

 

[JohnnyC]

Jim I can use those head rests

Are you around Saturday morning ... I am on Long Island till Sunday about 11 am

Love to swing by and say hi either way ... it's just my daughters and me on this trip

Pm me

 

[Chanaka]

I am interested in the gauge cluster if it isn't already spoken for. Please post photo's and price.

 

[McGruff44]

I need the top of both quarter panels. About 3" down from the top. It is the part that the hardtop sides bolt to. If you could include about 3" of each pillar that the part is welded to.
I have included a photo to help ID the Part.
If they are available, please let me know how much for both and shipping to 85383 Peoria, AZ
Thank you,
Vern

 

[stainless 40/45]

I would have to cut that out
If you still want it when I get back from California I will cut it out . $80 plus shipping

 

[McGruff44]

Awesome, is that for both sides?
Thank you,
Vern

 

[stainless 40/45]

Awesome, is that for both sides?
Thank you,
Vern

Yes both sides,shipping might be too much but we will see

 

[McGruff44]

Just let me know.
Thanks again

 

[McGruff44]

Did you find out about shipping yet?

 

[Rustynutz]

Hi Ron in NJ
I am interested in the Hood and and the windshiels frame and glass. How is the fiberglass top?

 

[OlyTacoma173]

Are the ashtray and glovebox door salvageable?

 

[73tlcv8]

Looking for a rear axle vent/breather. It is the part that holds the brake line TEE to the axle, shipped to 28461:

 

[KStoNCFJ]

hi @stainless 40/45
I had a thread going with you on a bib. You still have it?

 

[scott fasken]

What do you want for horn button and the steering wheel, I am interested.

 

[brian]

gas pedal and all linkage and brackets up to the carb?

 

[stainless 40/45]

What do you want for horn button and the steering wheel, I am interested.

For the steering wheel $125,don't know if I still have a horn button

 

[stainless 40/45]

gas pedal and all linkage and brackets up to the carb?

I have everything from the firewall but not the linkage to the carb

 

[brian]

I have everything from the firewall but not the linkage to the carb

That's a start.
What do you need for the stuff?

 

[Not 4 Pavement]

Do you have the carb? Is it the F carb?

 

[bunnycop]

what about the transmission and transfer case