Does anyone have a source for this boot. Also need the square plug for bell housing where the timing pointer is viewed. Best source for rear main seal too.
Lever was getting impossible to move, using a 500mm socket extension on the lever was still a big effort, rebuild time. Seems like a common problem on most part time 80 & 7X's with the HF1A, couldn't find any threads about rebuilds for part time levers. Don't have photo's of everything but it's...
Hello, I am planning to rebuild a J40 (1964) in very bad shape
What is the role of the lever
Where do these lights connect with
What is the role of the round lever
How does the rear hatch work - How does this fold
Help is Greatly appreciated
Kid at discount tine was convinced he was in a Fast and Furious movie, and snapped off the button on my parking brake lever.
(listed as Knob - 46217 below)
It's snapped off down inside the handle exposing the threads.
I think i have a replacement sourced(Part is discontinued), but I'm...
So I just had a thought, if you accidentally indexed the throttle lever on a rotary pump off a tooth, so you had to turn up the fuel to get it to idle, could that cause black smoke and a 'weird' feeling throttle pedal like it not being able to rev high enough even though the max stop is all the...
Selling this T-Case Lever from an FJ62
Sleeved brass bushings added to the shift points
no rubber bushings needed, works really well
$60.00 + whatever shipping
Please PM
Hi all
My old '95 petrol 80 series hasn't been able to have its sub tank filled for awhile as the level inside the fuel hatch is stuck.
Any thoughts on how to free it up?
thanks
I had the trans and t-case rebuilt on my 5/1977 FJ40. Upon reassemble I am finding that the transfer case shift lever does not clear the shift guide bracket when attempting to put it in neutral and L4. I can disconnect the shaft from the linkage and manually move the t-case through all...
Anybody have the under dash mounted parking brake (not floor mounted) assembly (complete) with lever for a late 70s FJ or BJ in good original condition and working order, that they would sell?
Thank-you kindly.
There's a switch without a label between my 4wd lever and the heated seat switches on my 2002 lx470. This button is completely missing from the picture index on the owners manual! I've looked all over the forums and can't find a single post about it. It's round with a white dot on one side...
Anybody know what causes the intermediate shift lever to bend in transfer case?
I rebuild this case 10 years ago from a parts 40, and went to install it today.
Couldn't get the shifter to work with the gate. Finally removed some parts from a working rig and noticed the bend.
Nothing was noted...
Howdy, I'm looking for a heat adjustment lever for my 1976 FJ40. Photo of what I'm looking for below. Preferably with the nylon bushings and clip. I can manufacture one if need be but would rather put my energy into the plethora of other work on the rig. Thank you.
I'm trying to finalize my to-do lists and cautions regarding the installation of a new H55f 5-speed (behind a 3FE and in front of an FJ62 transfer case) in my '86 FJ60 project. I recall reading somewhere here on MUD fairly recently (last year or two) that the H55f gears are "pre-set" at the...