h152

There’s tons of info on this swap but I’m gonna put it all in one forum on the first page! No more going to page 3 then 5 then back to 3 to figure out what you’re doing. Also not here to argue about what transmission is the best for the cruiser, just laying out an instruction guide for a h152...

Tried everything and can’t figure this out! I just did a h152 swap from a a442f on a 92 Land Cruiser with a 1hd-t. Once everything was in, I tried starting the truck and nothing happens. Power to car is good, then I turn the key and everything turns off and gives a very slight single click. I...

I’m looking at doing a manual swap (h152) to replace my a442f. I’ve got a 08/1992 RHD 1hd-t. I’m looking at the h152 kit on back40 imports and am wondering if that’s all I need? Seems like I’ll need the master to slave cylinder lines/brackets, center console (hopeful thinking), dash blank for...

Planning to do a manual swap into your 80 series? This is a conversion crossmember that requires no cutting or welding. 100% bolt on to existing structure. Reversible if you decide to go back to automatic tranny. The shifter plate bolts into existing holes and gives you a template as well as a...

Just on the odd chance does anyone here know what torque setting I should be using on a flywheel that came out of a 2023 vdj79 series or if loctite should be applied I am fitting it to hzj80 model. Thanks in advance

I have most of the parts necessary for a H152 transmission swap for sale. Many of them are New Old Stock (NOS)/New in Box. I have listed the parts below and have corresponding photographs. This transmission could be put in an 70 series, 80 series, 100 series gas or diesel. I'm asking $8,250 or...

Hello everyone, My current gearbox is starting to make a bit of noise from the input shaft at idle and the front seal on the transfer is weeping, otherwise shifts great in all gears, no other noises when driving and last time I dropped the oil there was zero metal. I can't really feel any...