fasteners

I was wondering if anyone has found a source for the fasteners that Australian Door Cards uses from a vendor in the US? They're a two piece push fastener that is pretty common when attaching plastic parts to metal panels. The twist is they are grey. I can't find them online or locally...

Hoping someone can help me with this one. Somehow over the last 23 years the two fasteners that hold the back plate for the blower motor resistor on my ‘89 62 have gone missing. Never notice it until I go to move temp from cold to hot this time of year. The loose plate and resistor keep temp and...

The front parts of my front fender liners were trimmed to clear larger tires on my 2015 and they won’t work with my TJM bumper I’m moving over to the 2015. The liners are in two pieces and attached by plastic “rivets” that appear to be single use. Are these single use rivets or is there some...

I am replacing my front bumper cover and am trying to get the fog lights removed. I noticed that half of the threads and nuts are virtually rust free and the others are horribly rusted. It looks like someone replaced three of the threads and nuts. I have already broken one of the rusty ones...

I am replacing my crossmember #2 with a Trail Tailor Crawler skid. Does anyone have the specs for the crossmember hardware handy? There are several bolts with 14mm heads and large washers (x4) and a couple (x2) of plain JIS bolts. They might be reusable, but are rusty/crusty, so figure I'll...

I live in a part of the country that sees a lot of rust - so I want to ask the pros their opinion on this undercarriage. Looking at buying this southern owned truck it’s entire life but is honestly too clean and appears to have too much consistency between the frame and fasteners. Please let me...

The fasteners on my burgundy FJ80 is VERY rusty. I have replaced some that were damaged and have rejuvenated ones with light surface rust on the wire wheel. I then got the bright idea to see if I can use a tumbler. First try was with kitty litter as media (FAIL). Then I bought the HF resin...