80 vs UNIMOG

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

One of my employees had a 60's 404 model. A very gutless, dated 4 cyl. even after the bed was removed and the frame bobbed.

It was overall very wide, tall, and parts were expensive.


Now a newer TDI, now you're talking, if you have the $$$.

I saw one wheeling at Spring Creek (the place Nay is always posting his pics from:D). It had the Huge Michelin XZL's and it idled through the worst line of the boulder field.
 
I had the chance to ride in a Mog at Moab and we did every obstacle on Fin's and things and Hell's Revenge with out spinning a wheel. The amazing part was we never left 2 wheel drive all day. I love my 80 but it's not fair to compare it to a vehicle with a 3000 to 1 crawl ratio. Yes, that's right 3000 to 1.
 
I had the chance to ride in a Mog at Moab and we did every obstacle on Fin's and things and Hell's Revenge with out spinning a wheel. The amazing part was we never left 2 wheel drive all day. I love my 80 but it's not fair to compare it to a vehicle with a 3000 to 1 crawl ratio. Yes, that's right 3000 to 1.
How did it come out with 3000 to 1 crawl ratio? :confused: Just asking.
 
Last edited:
In addition to the tranny and transfer they also have gear reduction at the hubs! Which is also the reason they have that incredible clearance. Very cool rigs, but WAY too big for up here.

I would think a locked FZJ80 would give one a run for its $ offroad-wise, but the on road characteristics and comfort are just way better in an 80. Just one mans thoughts?
 
Met some guys on the Rubicon with one. Small gasoline motor that would not run for crap. The slightest tilt and the carb would flood. Plus, it was just too wide for the trail.

They look sort of BA, but they are useless as a driver, ugly as hell, and will cause your neighbors to call the local authorities. I can't see even wanting one.

I am looking forward to the completion of dclee's Unimog project-hoefully he'll see this and post up.
 
Unimog's are awesome....too wide, but will idle over everything. 80's are for people that want to be able to daily drive their wheeler as well as kill most things on the trail. 80's are way cheaper and more practical.
 
One of these days I WILL own a MaxiMog :grinpimp:


veh_side.jpg


trailer_mog_big.jpg
 
I what context? Two very different vehicles.

Well the 80 is getting smaller every day, or is it the kids are getting bigger???
I just need more room and I think the Mog is "cute" and gives me the room to expand.

I plan on replacing the 80 someday and just as will start looking for a replacement now.
I will either go with a Mog or something else like it, import a 4dr LC truck (hard to find) or make get a younger 80 and do major body and frame mods to get a 4dr 80 truck.
 
The only vehicle that can beat an 80 is another 80! :)
 
I just bought a unimog and I have an 80. I'll let you know how I feel about both. By far an 80 is going to be more streetable. Off road, we shall see. I dont see the width being an issue. It's the height I'm worried about. I bought a U1000 which is insanely tall. Just about 9 feet. But it'll take a 44" tire stock and crawl like a mofo so that's gotta be good for something. There is no Uniwheeler. Every vehicle is good at something. Big bonus on the mog is that its ugly and original. How many mogs do you see on the road? Plus it's a turbo diesel so it's loud and smells bad! Woo hoo!!!
 
How did it come out with 3000 to 1 crawl ratio? :confused: Just asking.

Don't forget, these trucks are basically fast tractors and with the super crawler gears one some of these trucks it's hard to tell they are even moving in some of the lowest gears. So I've heard. I haven't actually seen that in action yet but picture one of those street sweeping machines. They are barely moving but they are at a decent RPM. It's gearing like that. Although the super crawler gears are reportedly very weak and not for rock crawling or heavy loads. Just for speed control. The crawler gears are still insanely low but have the strenght for rock crawling etc. Sadly my truck only has the 8 speed gearbox. Not the 20 something gears some of them have.
 

Go to benzworld.org and check out the unimog forum if you are serious about a mog. Lots of info to be found. I've been researching for months and have learned a lot. Those 2 trucks you pictured are nice but not daily drivers. The top truck is probably north of 30k and the lower one at least 25k. That's a lot of money to not be able to hit 55mph! The plate on my truck will read IGOSLO. You can make em go fast but it's not cheap. Definetly go for the DOKA if you have the coin. The crane makes it duty free when you import it too. Otherwise most of these trucks fall under the "vehicle for transport of cargo" category and is subject to a 25 percent duty.
 
I would have to deal with the neighbors if I got one BUT if it had the Mercedes emblem on it, it should fit right in:cool: with all the snobs in the neighborhood:flipoff2:
I have a Supra as a DD and the wife wants a Rav4 or LX300 so I won't be needing a DD 4x4 anymore.
 
Hey Kurt, I saw a Mog over the summer for sale just in NH from me. It had a back hoe attachment on the back. No problems with sallow graves.

Let me know if you are interested.

Where was this? I'm in NH and I though I found all the local mogs for sale?
 
Back
Top Bottom