Recent content by StuCruiser

impossible to tell from the photos, sorry. Do you have a wiring diagram for your truck? You’re going to have to follow that and make sure you have every wire in it’s correct location, starting from the battery and working through the complete starting circuit.

A couple of other things I noticed. You said both batteries (crank and aux) are going into the engine bay. You have a “core” series redarc. This is the cost saving option which redarc introduced a couple of years ago which is not as waterproof as the original more expensive 1225, so this...

https://cdn.intelligencebank.com/au/share/yE9N/zJpl/LYRVy/original/BCDC+Classic+Instruction+Manual+EN Instructions and install

So you have a 1225 redarc. So a 12v 25amp unit. The red wire from the cranking battery to the unit, and then the brown wire that goes to charge the aux battery will only ever see a max of 25 amps, as that what’s the redarc can provide. Redarc are saying use 6 or 8 gauge wire and they fuse it...

Have done a few of these and the redarc units are very good. The instructions are well laid out. Read these a lot. Yes, it can get confusing but just break it down into sections - your methodical approach will help you here. The spots and winch definitely go to the cranking battery. The aux...

Same model here. One common option down here is something from the Davies Craig range, the bigger the better. https://daviescraig.com.au/product/transmission-oil-cooler-30-plate-hydra-679/hydra-cool-universal-30-plate-heavy-duty-cooler-part-no-679 You remove the oil pipes that currently go to...

I’ve just left mine a s”dumb” then 😂 Does this help:

It looks like this. You can see the initial screw. https://www.cruiseryard.com/toyota-land-cruiser-fj80-fzj80-dome-light-sunroof-control-assembly/?srsltid=AfmBOoqnQzwqXJvX_v8CDz82ZitD67-mSYKLFc33NZlQrY_kHNvaYj-O

Are you able to check the settings or wiring setup on your head unit? There’s usually a wire that has to be connected so that the antenna operates when the unit is turned on. My antenna only operates by using the up/down button on the dash, which is fine by me.

Worked a treat: https://forum.ih8mud.com/threads/harrop-e-locker-using-oem-switch-and-dash-lights-in-a-hdj81-fj80.1048129/

Can’t quite see in your photo. Are the indicator lights there in the cluster, just no bulbs? This was the case on my 80. I followed a thread on here which allowed me to use the original lamps with aftermarket lockers.

This is the one you need. It’ll be on here

I think it might be 8226160020 Discontinued 🙄

Hi Can anyone help me with the part# for this part of the loom please, so I can search for it on Amayama? The black plug goes onto the back of the alternator and the grey plug joins the main loom under the airbox. No numbers on either. It’s about a foot long.. 1HD-FT 1997 The grey plug...

Are you saying you are getting ~24v at the starter when you are trying to start it? If so, then it must be your starter motor. Easy to take out, and strip it?