Recent content by redmelon

Hi Rudi, so the resistance was around 25 Ohm for the Water Temp and abt 70 for the oil pressure. However as I saw in the manual you provided for the BJ Models it should be around 66. So that seems fine. Will have to go and check all the cables again and the oil pressure sensor again. The water...

Hi Rudi, Could you please help reconfirm a suspicion i have? I started checking based on your advice. Oil pressure still dead. So i took the meter out. The metal bar leading to the hand is bent and when i look at the wire in the middle its brown. The plastic behind it seems toasted. Do you...

Thanks a lot Rudi! I will have a check! Mike

Hi gents, yet another question to the clusters. I have a 79´ BJ43 in 24V. The wiring got terribly abused by the previous owner so I am slowly going my way forward to get everything that was original working again. On my cluster the temp gauge and the oil pressure was dead. The temp sensor looked...

No worries :) Did not expect you to understand that LOL

Thanks a lot! But just to note - the 9,5mm is the rope size on the drum. I will throw in some pics as soon as the winch arrives. :)

Golemwinch 12000lb - slightly better Chinese winch (smth like harbor freight). Made for some guys here and they have all the spares as well. Despite that will take it appart and grease it should be just to make sure...

Thanks a lot for the tips guys! And also for the remark on the jumper. For the jumper - would you use like a 40mm2 wire? Cheers, Mike

Hi guys, i have a 24v BJ43 and want to connect a 24v winch. On a 12v winch this would be easy as you connect to battery etc. However with the 24v system i have two 12v batteries in series so my gut feel says i cannot connect to one of them but have to connect somewhere after them so the cables...

Hi Gents! Thanks for that! So I will either have to fit new ones or have the old ones hammered. Do you think its worthwile having the old restored? Thanks, Red

Hello, Tried to check the other threads but did not find a proper answer. Does anyone know whether I can fit HZJ78 rear leaf springs on a HZJ74? Thanks, Red

Thanks FJ! I am looking more into the troopie kind of benches. Lets see if I find someone who has the long benches in his HZJ 73/74 or LJ73 and could make pics of the fitting.

Hi FJ73! I indeed want the seats only for very random use but want them in. Could you please take photos of the both seats up and down and where and how they are attached to the car? Thanks a lot upfront!

Thanks gents. Will try to do a few pics within the next two weeks and within that time also try to look for a recessed dashboard. Is it easy to dismantle the old dashboard? Had a look on the thread from HZJ79LEE but am still not sure.. Will have a look at it once I am on holiday end of next week.

Hi, I have the one on the pic. 12v So it seems like i need to get another Dashboard?