Recent content by PidgeonGuggolo

This thread has been gold for me. Yesterday just checked the imagery for the brake lines. Just all the well done work and the good set of documentation will bring me back here regularly. How is everything going? Running well?

Where the dent is, on the transition to the regular shape, on both sides there is a gap where i can push a flat metal piece inside of about 2mm and it spans about half way of the balancer. I read that this will come loose at a later stage... I read about AC and PS on the same belt to be a...

Lemons Lemons! Life! Why o why. I welded the washer and the nut onto it. And it just snapped further down there... So now i have no clue what to do. These reverse drill bits which should get screws out not worked a single time for me. And they always snapped when the force was applied...

Ordered this part now: https://www.allfourx4.com.au/Powerbond-by-Dayco-Harmonic-Balancer-suitable-for-Landcruiser-40-60-Series-2F-HB1089N/ I tell myself its an improvement and AC and Powersteering should have their own belt...

That reaction means im ****ed :bang:

Today i died a bit inside. Again. Im so sad and angry at myself the same time when something like this happens. I was polishing the surface of the harmonic balancer and then it fell to the floor. I was spinning it on a stand drill and it just flew off.. after about 20 min of polishing... Now...

Please DM me id like one. 2F?

Updates Updates Updates. Sandblasted the Transfercase and other Parts with Glas. Glasblasted. Gave it to someone because i have only the other Medium. Turned out quite nice. Then recoated it with some Wax like primer. Its strange how it changed the color but it gets more silverish by the day...

It's for the Gearbox. I think the Pump is fine. Well I have a damaged o ring from the cross shaft and it is 35.4 inner diameter. And so far I was not able to find 35.4 mm ID and 4mm thickness. That's why im bit frustrated. Thanks for the tip. Didn't think about hydraulic shops! I'll drive by...

Hi all Not sure its supposed to be written here but does anyone know the exact size of this O-Ring? 44101E - RING, O(FOR STEERING WORM) 90301-44001FJ4# Im in desperate search of some parts form my 1982 Power Steering Unit. I need these O Rings and the Teflon Rings fitting around them...

Tiny update. Yelloooooowwww And some weird looking foam...

Hey Ben Look at how this guy did it: https://forum.ih8mud.com/threads/eds-un-did-fj40.1374437/post-16186151 You can see his cutouts in the first post. That guy seems to be a master. Like the one you are becoming. Hope this helps out. Cheers from Switzerland, keep it up. Enjoying the show...

More pics. Proud moments here.

Heya I did another test session. Took me a while. Who would have thought I don't have a spark plug nut. I forgot that I did lend that when I first pull them off. So after some back and forth (later a second time because I bought the wrong bolts for the engine stand) I finally got the...

Okay. The sound of reason is ringing from your answers. So I'll try cranking without fuel. The engine was running for about 2 hours 2 years ago and sat 38 years in a shed before. I really hope not to rebuild it this is my first motor after the 2 strokes in my youth. Good that I didn't get my...