Recent content by ohuj100

  1. O

    Help diagnose front creak

    Hopefully the link works. Trying to figure what the creaking noise is when weight shifts from left-to-right and vice versa. 225k miles. No front sway bar. OEM shocks with 15k miles. OEM upper control arms with > 5k. Aftermarket Ironman TB's with 10k. Intuition tells me lower ball joint. More...
  2. O

    High pitched squeal, low speed, back right corner

    Mine was incorrectly installed pad shims. Have you had brake work done recently?
  3. O

    The infamous clunk

    I actually freshly greased drive line before the trip. I am willing to accept it's never going to be perfect, it's a 20+ y/o truck. However the accelerator lift clunk is concerning it feels like it's shocking the driveline. I'd like discern if it would be worth while to replace the front...
  4. O

    The infamous clunk

    Didn't want to start new thread cause mods and "search". Went wheeling, about 20-40 miles in low range. Once I hit pavement I noticed a clunk when letting off accelerator, and in the last few few feet of braking. Additionally the P to D clunk is violently loud now. It seems like the P to D is...
  5. O

    Gauge cluster light out and climate control light flickers

    YMMV but cluster being out for me was as simple as replacing a faulty taillight bulb. Same symptom blowing 15a fuse. The ac lights may be on a fuse (not sure) but can burn out with age.
  6. O

    RTH: Torque Arm Bolt is toast

    Success! You rock @awesomeissquid thank you so much now I can keep going on this work🤗
  7. O

    RTH: Torque Arm Bolt is toast

    Does the arm need to be supported during this? Btw thanks for the help I really appreciate you.
  8. O

    RTH: Torque Arm Bolt is toast

    Will I need to separate spindle arm to get things to move?
  9. O

    RTH: Torque Arm Bolt is toast

    Doing some front end work. Couldn't get the nut to come off when I did this what it looked like.:bang: What is the easiest way to get this bolt out? Look like I need to unbolt the lower control arm, can just the one side come out? Or do I need to unbolt the front side too? Do I need to undo the...
  10. O

    85k Mile Unicorn Riverrock Green Mica LC Find

    Congrats on the find. The world wants to know, does the "D" light indicator still work?🤔
  11. O

    Aftermarket Battery Terminal Options

    @AlpineAccess
  12. O

    [Photos] What are these rusted parts / should I be worried?

    You don't have to order the hardware but I paid $600 ootd at Partsouq
  13. O

    Front Sway Bar Bushings

    Got mine for $6 a piece at partsouq:flipoff2: Regardless that had to have felt good when the Mr.T parts came out
  14. O

    Upper Ball joints and Lift

    It seems the difference is negligible. Especially when you consider how limited travel is with the Torsion bar setup. Makes me feel more assured that OEM was the right move.
  15. O

    Upper Ball joints and Lift

    Ohhhhh I get you know. So the wear on these components can not really be prevented in a lifted application unless an aftermarket arm is used? In applications less than 2 inches over stock, are the issues the same?
Back
Top Bottom