Recent content by ODSTbee

  1. ODSTbee

    100 Series buying/selling advice, rust check - post here

    A750F is good. Getting much above 70 will get the engine working about 2500 rpm and the volume increases. I run 33" tires now and cruising 10% over in a 70 mph zone is just right, low 2000s rpm. Stomping the gas takes a moment to downshift, but works fine anyways. I put 40k on in the past year...
  2. ODSTbee

    Pretty quiet in here... what are you working on?

    I'm currently grinding the aftermarket hitch off my LX470 to fit my 33" spare. I need tips. Cutting disk first then grinding disk? Edit: gone for more sawzall blades...
  3. ODSTbee

    Front and Rear Big Brake system for the 100? Survey

    "Would you like to ditch the shoe in drum parking brake and go with an electronically controlled actuator?" Yes and no I'd like to ditch it and put a hydraulic handbrake. 😂 Sounds like a stellar upgrade. Best wishes
  4. ODSTbee

    HVAC blend door actuator 87106-60120

    I was hoping to look into my lack of feet air before winter. Is this the prime suspect for the foot option going out the defrost and head vent?
  5. ODSTbee

    Options for aftermarket parking brake shoes?

    I just put on the powerstop shoes from Rockauto. When fully adjusted out, they still dragged significantly for about the first 60 to 80 miles. I don't know exactly how long it took, the miles add up fast for me. I had a landcruiser shop look at it and they said I did everything right. By that...
  6. ODSTbee

    What have you done to your 100 Series this week?

    I had to have a helper hold the wrench in place so I could kick it with my feet. That was only the driver front. The others I got more torque on. I bought mine through Impex.
  7. ODSTbee

    Media The MUD 100 series Photos thread

    Ocracoke. AHC does great over the sand.
  8. ODSTbee

    PDI Torsen Center Differential

    Whoa, I've been dreaming of doing a torsen center, torsen rear, and a supercharger and using my truck like it's baja. Now you've given me a real reason. 😂
  9. ODSTbee

    Looking for new or damaged Engel 12v cord!

    Wow, it's almost impressive how hard it is to find that posi fit connector on the internet. National Luna sells the BSP05003 which is compatible, but there's only a couple sketchy websites where I found it for sale online around $13. Good luck!
  10. ODSTbee

    How to fit a 33 inch oversized tire underneath with hitch

    Great, thank y'all. It does appear to be a Hitch Crafters brand hitch. Thanks GTV for the tool recommendation. I can deal with not having a weight-bearing hitch for the time being, so I'll cut it off then start the search for a stock hitch.
  11. ODSTbee

    How to fit a 33 inch oversized tire underneath with hitch

    Here's the status quo. I recommend cam straps over ratchet straps to anyone attempting. Ratchet straps are too easy to over-tighten.
  12. ODSTbee

    How to fit a 33 inch oversized tire underneath with hitch

    My 2005 LX 470 has a hitch that limits spare tire size to less than 32". The limit is from the panhard to the center of the hitch. I have 285/70R17 tires... 32.71 inches. First, here are some pics It's welded on which defeats my current tools and skillset. Here are the options I've put...
  13. ODSTbee

    Looking for opinions/experiences... Michelin Defender LTX M/S vs Toyo Open Country AT3 vs (something else?)

    I had the Michelin Defender LTX M/S (not the M/S 2) on my 100 series before switching to a larger BFG KO3. Go with the Defender tires, their offroad traction will be plenty. The braking traction, wet traction, and noise are definitely better than the BFG KO3. All-terrain tires will have...
  14. ODSTbee

    Media The MUD 100 series Photos thread

    Gave the lexus a wash! First one since the wheels, tires, and hidden winch. Next up, the pile of front suspension ball joints, bushings, and arms sitting in the garage.
  15. ODSTbee

    What have you done to your 100 Series this week?

    I went for the 1800 mm (~6 ft) winch relocation kit. I used a Comeup's small u-bracket and a single bolt that matched the thread of some existing hole beside the fuse box. I may get the tool and do a couple riv-nuts in the exact location I want. Here are the results of my late night push to...
Back
Top Bottom