Recent content by mobambag

Dobinson Front IMS45-60912 - 4" Long Travel Monotube Shocks Dobinson Rear IMS59-60687 - 4" Long Travel IMS Rear Monotube Shocks These are the shocks I have.^^

Thanks for the detailed feedback. I already picked up the adjustable panhard bars, so I’m going to run it for now and see how it holds up, then upgrade to a rear panhard relocation bracket later if needed. Same idea with the UCAs and steering stabilizer, I might as well throw those on while I’m...

I’ve been reading a lot of different information about 3 inch suspension lifts and the types of corrections they may require. Since this will be my first time doing this, I’ll list what I already have below and would appreciate any guidance on what I might be missing or will need. I want to note...

Thanks for all the detailed info, really appreciate it! That clears up a lot. I’ll definitely reach out to Exit Offroad and see what they recommend for my setup.

My 80 Series is currently on OEM springs and shocks. I plan to upgrade aiming for a 2.5-inch lift in the front and a 3-inch lift in the rear to compensate for additional weight when the back is loaded. This setup should allow the vehicle to sit level under load. I also plan to install 4-inch IMS...

Yeah I thought so too, I just wanted to confirm because tbh I’ve never really seen anything about this charcoal canister on the forums. The only ones I’ve noticed mentioned a few times are the AC Delco 215-153 and VC-120. I’ll be going with the Dorman charcoal canister and plan on installing it...

My local Land Cruiser specialist shop (Torfab) in WA suggested this below, claiming it is the universal replacement part Dorman Charcoal Canister Part # 911-478. Has anyone had any experience with this charcoal canister? yea or nay?