Recent content by lumbee1

  1. lumbee1

    RTH 80 stalled on highway, CEL not lighting up. Blown fusible link

    Another recommendation for finding a short and how I eventually found mine, is to look for the short at night with no lights. I hooked up my jumper and started shaking the wire harness at various locations. Eventually I saw a spark of light and heard the click of the fuse. The spark came from...
  2. lumbee1

    RTH 80 stalled on highway, CEL not lighting up. Blown fusible link

    Before you bypass the fuse/fusible link and replace it with another fuse/fusible link, you might consider this. I blew my fusible link and the Cruiser shut off. I replace the fusible link with a new one ($15) and it immediately popped again. I jerry rigged this guy up to use spade fuses while I...
  3. lumbee1

    Media Official 35" and under!! Post pictures!!

    This thread needs more pictures. OE wheels with 315 Cooper ST Maxx.
  4. lumbee1

    Need new radiator

    I am supercharged as well and this combination works for me. Denso rad from Rock Auto $300 Blue fan hub with 15K fluid (I think) 6mm spacers from McMaster Carr to get the fan as far back to the engine as possible. Toyota red for coolant OEM fan Gen2 fan shroud Foam around rad and shroud. My...
  5. lumbee1

    Compatible 80’s Series Touchscreen Radios… Your guys’ experience & examples! (Sorry to rehash!)

    THIS! you captured it perfectly. BTW, my Android tablet is angled in such a way that the headliner is reflected which is really dark. Glare is only a problem if I open my sunroof.
  6. lumbee1

    Crack in dashboard

    With winter coming this thread is just in time. The dash pads can also crack due to cold weather. Mine cracked several years ago after we had a week of somewhat cold weather (lows in the teens). For years I applied 303 Protectant at the beginning of summer but in the end, age won out. I...
  7. lumbee1

    New to NC

    Looks like a really cool place to have a ONSC get together.
  8. lumbee1

    Where is my coolant going?

    BTW, gen1 on the left, gen2 on the right. The gen2 head gasket addresses the most common failure points. For OP, do you happen to know when one you have installed?
  9. lumbee1

    Where is my coolant going?

    My Cruiser only had 15K miles after a full rebuild when I noticed the temps acting somewhat inconsistent. Scangauge definitely helped identify the problem. My Cruiser normally runs cooler than most but I saw it get close to 200* in relatively cool weather. After checking the coolant I found it a...
  10. lumbee1

    Compatible 80’s Series Touchscreen Radios… Your guys’ experience & examples! (Sorry to rehash!)

    I took a bit of a hybrid approach. Pioneer Double DIN CD/radio/Android Auto/backup camera unit. Would not recommend but I got it for cheap. It works fine as a radio, steaming box but the glare off the screen is so bad that it is difficult to use for navigation. What's more impressive in day to...
  11. lumbee1

    Radiator Replacements

    TYC1918 It's available through RockAuto.
  12. lumbee1

    Speaker mounts

    Sorry, I've got my answer. My speakers are mounted to the door card and the door steel. I don't like it. I've pulled off my door cards at least two dozen times and it always has to start with removing the speakers first. I would rather have the speakers mounted to just the door steel with just a...
  13. lumbee1

    Speaker mounts

    Are your speakers attached to the cards or just the door steel?
  14. lumbee1

    Speaker mounts

    How are your front and rear speakers mounted? My Cruiser came with aftermarket speakers. I replaced them with the popular Polk shallow mount speakers. After two of those died I replaced them with some truly lovely Infinity speakers. However every speaker I've had has mounted on the door card. If...
  15. lumbee1

    Build My "ran when parked" Land Cruiser from Craigslist

    The ABS surrounds for the door handles are still available and fairly cheap. I picked up new ones off ebay a few years back.
Back
Top Bottom