Highly recommended. Vline VL2 Android auto/Apple car play. It's amazing and installs not too difficult at all there's actually videos on their YouTube channel showing how to install it in the LX470 step by step instructions. I am stalled it in like 2 hours.
Here is a YouTube video I made...
Guys after testing the crankshaft position sensor circuit all of the wires the sensor etc I decided to take it up to a local shop that works on European and Japanese cars. Despite the code being p0335 indicating an issue with the crankshaft position sensor, The tech discovered that the camshaft...
Yep my step was to inspect The reluctor wheel next. I like your idea of looking up through the whole by removing the crankshaft position sensor. Maybe I can just rotate the engine by hand and look for any damage for missing teeth.
Okay guys I have an update It turns out when I was doing the original test at the ECU plug on pin 20 and 21 I was actually testing the wrong pins. This morning I moved over to the correct pins which are 20 and 21 I was just on the wrong side of the plug. I'm getting a perfect resistance...
Yes that's correct and I just learned that at the ECU plug it should be roughly the same as the sensor I was just assuming it was lower at the ECU because of the wires running all the way up to the plug. So it sounds like I have something wrong with the wire.
2007 LX470.
Hey guys I've been trying to troubleshoot a very difficult problem and I can't resolve it. The other day I got a check engine light and traction control light pop on and I hooked up techstream and got the error code p0335 which is for a crankshaft position sensor. Keep in mind the...
I actually found a local supplier in the United States that sells the full set for $824.99. they are ASRparts.com. just seems a little easier and safer than shipping from impex with their disclaimer that they will not ship gas filled suspension parts.
Hey guys, just purchased a 2007 Lexus LX470 and I am trying to find the best place to buy new AHC globes (accumulators). I saw other posts on the forum about Impex however they specifically say on their site that they will not ship "gas filled suspension parts". The globes are nitrogen filled...
Yes I was thinking the exact same thing Thank you for confirming this. I can't imagine a piece of foam doing anything else or being for any structural support of the aluminum plate.
Hey guys yesterday I was changing my timing belt on my 1996 HDJ80 which has the one 1HD - FT engine. Behind the actual timing belt is in aluminum plate that holds the oil seal that goes around the camshaft. When that aluminum plate is removed there is a piece of foam stuck behind it that was...