Recent content by FatlessLemon

Yea good call I reckon ill take the driveshaft to a shop and see if its balanced. I measured flange angles with a digital angle gauge and they were about 2 degrees out from one another. The transmission flange seems to be pointing down more than the diff flange, and the diff flange is right...

Ive been meaning to try that. 4Hi with a spartan locker in the front going 60 on the highway makes me nervous for some reason lol, I think im just being a baby lol. I think its definitely the next step to try and isolate this vibration.

Yeah nice ill take a look at that. I find it odd that it only happens between 60-75ish and not at any speed. You'd think you'd hear it through all different speeds.

1. No play in driveshaft 2. Ujoints recently changed and greased and slip joint greased. 3. Doesn't seem to be a change in frequency. 4. Driveshaft is in phase.

I was thinking that too. It has an old tired OME lift on it. Theyre starting to flatten out a bit it looks like. The angles on the flanges on the transfer case and differential seem to be correct. I had a running theory in my mind that the leafs and bushings are worn to the point that I get a...

Hello everyone! I've got an 86 HJ60 that has an annoying vibration. Whenever I get up to 60kmph (on the speedometer with 33s) I get a pretty noticeable vibration. It feels like the torque converter locks up right at 60 and then I feel the vibes. It almost sounds like a whir whir whir sound...

Yea, I just finished pulling off the old head and put a new one on. The threads on the injector were pretty trashed but I was hoping it was good enough. It lasted about two days with the truck running before the nut worked itself off and came loose but not loose enough to notice until I...

Ya thanks I found that guide on another thread, helped me fix the issue. All of your guides you have up on Google docs have been really helpful sorting out issues I appreciate it! I pressurized the lines from the lift pump forward and saw bubbles. Turns out it was sucking air in at injector one...

When i crack it and pump it foamy and airy diesel comes out, I can't get a steady stream. It's been replaced with the bosch hand pump.

Hey all! Ive been having some issues with my HJ60 that just started happening today. Truck was running great until it wasn't. I was stopped at a light and when I went to accelerate it felt like the truck was hesitating but then it drove normal again. This continued to happen and get worse and...

Hello all! Im having some issues with my alternator charging. On my way back from a long road trip the battery charge light and filter light all started to blink on and off very fast. After about 15 seconds they came on and stayed on and I noticed the voltmeter on the dash displayed no charge...

Sounds good guys I appreciate the insight and suggestions. I'll start looking into the soft lines and I'll try clamping the feed line like you suggested. I'll report back with my findings.

Yea I see what you mean, the lines that run between seem like they could pose a problem. I definitely noticed it bending a bit when I tried to the nuts loose. I'll try clamping that return line and see if that helps. Thanks again your insight on 2Hs is very appreciated.

Yes! I made sure to replace all three when I put the injectors back in. The kit I ordered came with all three. Everything was torqued to spec. Yes once it starts it drives no problem all day long, I can even leave it for an hour or two and it'll fire right up no problem, it's only when it's...