Recent content by Effjay80guy

  1. Effjay80guy

    Florida LandCruiser Owner Registry

    Hey I live in homosassa. I have a 91 fj80 you still have your rig?
  2. Effjay80guy

    Registry 3FE Owners Check-In

    Matt, west central Florida 1991 FJ80 3FE w/285,874.9 original miles. Daily Driver. Had whole brake system done, new water pump, new radiator, head was redone after an overheat. Cats gutted, bought a used dizzy from a mudd vender couldn't be happier 32" Goodyear mtr . Needs new birfs, actuator...
  3. Effjay80guy

    Can't unlock transfer case

    OK. is there another dash light that is supposed to come on when it's in Low. like an A/T light or something.
  4. Effjay80guy

    Can't unlock transfer case

    I just noticed that I don't have the abs light on that I have seen mentioned. I will pull the switch out and clean it to see if that helps
  5. Effjay80guy

    Can't unlock transfer case

    No grinding or noise just that the light is on on the dash and will not go off.
  6. Effjay80guy

    Can't unlock transfer case

    Would having to push the shift lock button to go from park to review. or drive be some kind of indicator
  7. Effjay80guy

    Can't unlock transfer case

    Fuse is good
  8. Effjay80guy

    Can't unlock transfer case

    I had the truck on a lift not long ago doing brakes and bearings. the arm that you are referring to at 12 I couldn't move. so do I need to remove and replace to free it up. also even though I hear clicking assuming the switch is working I have no lights on the button. all other dash lights are...
  9. Effjay80guy

    Can't unlock transfer case

    My 1991 fj80 diff light is on and when I pushould the diff. lock button nothing happens. I hear a click from the kick panel by my left foot but nothing changes. what would be the proper test to tell or deduct what the problem might be.
  10. Effjay80guy

    91 Land Cruiser Brake Problems

    Is there a way to check vacuum or the egr valve to see if it's within spec. I have a hard peddle and have read the treads on this and before I get into a booster I would like to know about any vacuum tests. Also I have been running strong with the new dizzy so thanks for your help on that.
  11. Effjay80guy

    She got me to work and now won't fire.

    Yes. Jason @arcteryx definitely came through with the distributor. And I can not say enough about ih8mud fourm, a ton of good people on here with tons of knowledge that have no problem helping the fng's
  12. Effjay80guy

    She got me to work and now won't fire.

    Thanks jonheld did it yesterday with a pipe wrench. Got the dizzy in and pow we have a running 80 again. All I have to do now is some fine tuning, I think I might be off a tooth but it's running. Thanks for the name drop with the part it was everything he said it was. Very happy with everything...
  13. Effjay80guy

    She got me to work and now won't fire.

    I read that it's above the starter where the motor and tranny mount there is a rubber grommet that you remove but I can't see back in there to even see the grommet. So I have decided to try and match TDC with the rotor. But the problem I have now is that my crankshaft pulley nut is huge and I...
  14. Effjay80guy

    She got me to work and now won't fire.

    So now I am ready to remove the dizzy, but I can not seem to find the timing marks so that I can set the dizzy at top dead center before removal. Any help would be appreciated .
Back
Top Bottom