Recent content by daeojkim

This is the actual part number of the clip. (63479-60020)

This might work. I can't guarantee. Although I would rather try find the actual part. https://www.amazon.com/dp/B0DS136XYZ?tag=ihco-20

Did you find an answer to how to remove that last wire where the 7.5 Amp fuse goes? I am stuck here. I am not sure how to remove it without damaging the fuse connector. I don't think you are supposed to just pull the wire. I thought may be there is a way to carefully push from the top. Does...

I contacted ARB and spoke with the technician. According to him, the splash pan came with 2002+ s bumper models (3413190) and he did not see it in previous model bumpers (3413050). Mine is 2000 LC. He didn't think the splash guard from 2002+ bumpers would fit. I will have to resort to either...

Thank you for the feedback. I emailed cruiseroutfitters

Great thank you. Do you know if those can be bought separately? guess I will contact ARB to find out.

Hello! I recently bought a 100 LC and doing some work on it. It came with ARB deluxe bumper and ASFIR front skid plates. I noticed that there is an empty space between the ARB bumper and start of the front skid plate. This exposes the winch controller and the radiator. (please see picture) Is...

I bought it from local toyota dealer. I thought it came as a pack. May be I ordered the clips separately at the time.

I am not sure what that is called but it came with the bracket. I didnt have to buy it separately.

At the time, Lexus part was far expensive. May be things are different now. If you can get the part cheaper through Lexus now then you should get it through them. Also the dealer I went were always being a PIA by asking me VIN number and trying to find corresponding parts. Since 2016+ LX do not...

So I got a second pair and just replaced both the front and back. Since I have a heavy set up with steel bumper skids, winch etc having two won’t hurt.

I am upgrading front bump stop with Timbren bump stop. I come to find that there are two bumps stops on each side for each leg of the LCA. I only had ordered 2 bump stops. Do you think it is essential to upgrade both bump stops on each leg of LCA at the same time? I was concerned it would...

I am upgrading front bump stop with Timbren bump stop. I come to find that there are two bumps stops on each side for each leg of the LCA. I only had ordered 2 bump stops. Do you think it is essential to upgrade both bump stops on each leg of LCA at the same time? I was concerned it would...

All 8 brackets go on the side of the roof only. The holes on the roof are all accessible by taking down the headliner to the extent as shown.

I only took down the rear end and sides. I was able to reach all bolts for the railing with the way it is in the photo. Removing the front was going to be a lot more involved due to all the cables etc. Decided not to remove it. If you decide to put additional rear back up camera (because rear...