Recent content by crobson

I would say absolutely, although not by design. My recollection is that the Slee tray with compressor mount is basically a L with the big arm being mounted downward & horizontal and the small arm frontward & vertical. The space provided for the compressor has a floor, but the dual compressor has...

Cool project, keep the updates coming.

I had done some research for another project for readily available marine carpet. It's available, but not the same color/pattern as what Huracan supplied, so I didn't retain the info. I'm sure adding it later is perfectly feasible. What isn't captured in my post is the fact that I started...

Looking good! With regard to the hangup issue as the stock tailgate gap cover impacts the new latches, consider this: Having isolated the sharp & small radius of the leading edge of the gap cover as the problem, I started searching for suitable edge protection solutions. I ended up at McMaster...

Inside the rectangular frame member? So enter the up front and run inside all the way to the rear? I use 0.125" stainless wire to run everything. It's rigid enough to push and also hold a shape. I bought a 25 Lb spool of welding filler wire 20 years ago and still have more than half. I make 2...

Props to your skills! Mine is by TrekBoxx, but looks incredibly similar.

Penetration at rear left corner. Second battery, compressor, & all wiring/fuses/relays here.

SureSine 150 installed in original subwoofer location. Access to Remote/Off/On switch & AC breaker through jack storage hatch. Looks like I missed a panel connector.

Finally finished the SureSine 150 Inverter installation. It’s always interesting to discover which projects end up being more challenging than I expected. I planned & spec’d this a year or so ago & im holding firmly to the idea that I had a really good reason for choosing this inverter. The...

^ this, until the gap part. I'd fish the wire through the existing rubber wire boot. But I'm severely loose wire adverse.

ttt

$150 picked up in 92675. Can ship too. Used, Dirty, Custom Holes(that you may not want or need) Pulled this off my 2002LC when I installed a Dissent bumper. I just rediscovered it under a pile of stuff.

Thank you, but I am not intelligent enough to navigate that site... My google-fu also failed me. I am shame.

Thank you. Happy to answer any questions and add details to this post.

Finally finished up most of the new electrical work, compressor, and dual battery setup. This all has turned out to be a very big project. Coming together nicely.