Recent content by Commander AJ

I would check the main connections between the filler neck and the tank first. Maybe they forgot to tighten a hose clamp? Good luck!

This is the switch that caused my problems. What issues are you having exactly?

She still runs smooth as silk, this vehicle has brought me so much joy! All the 4x4 camping trips and adventuring with good friends will never get old!

I just did an oil change on the 06 GX and while taking the used oil back to the parts store the oil lamp came on. When I pulled into the garage there was oil all over the undercarriage and everywhere under the hood! It looked like someone dumped 5 gallons of oil all over the engine. I pulled...

Found this site a year ago but no idea if these are legit or not. A750F Transmission for Sale, Remanufactured Rebuilt - https://spprecision.com/products/a750f-transmission-sale.html

My 2006 GX threw an uncommon code P2772 recently which according to the code reader was the L4 switch on the 4wd transfer case. It's about 60$ on EBAY and the part number is 84222-35080. You have to drop the transmission cross member to access it and I think it was a 27mm bolt size. I...

Thanks for the clarification fellas! :beer::)

What exactly does the RSCA button do?

Nice find! I didn't use super glue and its been fine for 70k but in hindsight I think it's a good way to go...time to find the super glue lol!

I have about 2" to 2.5" lift in the rear and the 10"x4.75" bags fit perfectly. I also am using the stock pump with the sensors adjusted to keep pressure in the bags. I'm sure you could bypass the automatic sensors and just use the existing hi/low switch to adjust them manually. If you figure...

Totally agree with using the longer bags, the short ones just don't cut it. One thing that I did was countersink the bolt holes in the lower isolators so that the bolt did not rub on the lower portion of the bag. Pretty sure the bags are durable enough to withstand the abuse but I did it anyway.

So far my bags have been holding up great while being fully inflated the whole time after install. These things seem pretty dang durable! I used the 6003's and they fit perfect but I did not use the upper isolator if I remember correctly. Stock compressor works just fine and there are still...

Booger welded some brackets onto the back of the front bumper support to mount a transmission cooler. Sprayed them with rustoleum after a quick wire wheel treatment to keep the cancer away hopefully! The cooler added about a quart of fluid to the equation which should help with efficiency as...

$133 on Amazon for the sequoia alternator mentioned above. It comes with an amps/rpm test graph, the one I got hit 178 amps at 6k rpm and roughly 140 amps at my normal rpm range of 2000-2300. DB Electrical 400-52686R Remanufactured Alternator For 4.7L Toyota Sequoia 150 Amp 2003-2009...