Recent content by bdhelpaso

  1. bdhelpaso

    78 FJ40 Fuel Line Sizes

    The problem is the fuel lines don't handle the gas/additives very well at all and leach through. The 5/16" regular fuel line fits but I recommend using a 5/16" Teflon TFT line instead. Works great with no gas smell at all.
  2. bdhelpaso

    Manifold Thermo Sensor Replacement

    I called and left a message
  3. bdhelpaso

    Manifold Thermo Sensor Replacement

    Did you find one?
  4. bdhelpaso

    Manifold Thermo Sensor Replacement

    Great. Hopefully it will fit a 1978 model fj40. Let me know.
  5. bdhelpaso

    Manifold Thermo Sensor Replacement

    do you still have any of these
  6. bdhelpaso

    How much would you pay for a molded reproduction FJ40 floor mat?

    Thicker is better, but I would strongly suggest molding it so you can place a dynamat or hushmat underneath it. Might be smart to offer a dynamat or hushmat custom fitted as well and sell as a combo or separately.
  7. bdhelpaso

    Watch me rebuild my entire fuel system

    sure. Wouldn't mind seeing your rig. How do I get a hold of you?
  8. bdhelpaso

    Raw Gas Smell in and out of 1978 FJ40

    If this works, I will post the total solution.
  9. bdhelpaso

    78 FJ40 Fuel Line Sizes

    I think I responded in the other thread, but yes, it is definitely the soft fuel line. It is permeating gas. After I removed it and capped the feed and return nipples, the smell disappeared. What fuel line did you use from the feed to the metal line underneath the body?
  10. bdhelpaso

    Raw Gas Smell in and out of 1978 FJ40

    It appears that the feed and return lines actually are permeating gas. The sniffer goes nuts when run along the line all the way from the feed on the tank to the metal connector under the body. A friend of mine owns a custom gas tank manufacturing company and he has seen this problem. It...
  11. bdhelpaso

    78 FJ40 Fuel Line Sizes

    That's how mine is as well. Maybe I need to replace the 2 lines once more. Also, do you use a check valve in the line from the fuel separator before the hard line?
  12. bdhelpaso

    78 FJ40 Fuel Line Sizes

    Both the return and the feed were new and replaced by me. Hmmmm. Maybe I cut it although I can't imagine I did. I was hoping that maybe the 5/16 was too big and somehow gas fumes were somehow getting through (even with the clamp). I guess not. I assume you simply ran the 5/16 from the...
  13. bdhelpaso

    Raw Gas Smell in and out of 1978 FJ40

    All lines are new. What is a back amp? What size line is the return and what size is the fuel line under the tank? 5/16 or 1/4
  14. bdhelpaso

    78 FJ40 Fuel Line Sizes

    I need to confirm the following: 1. The 3 vent lines on top of the tank to the fuel separator are 5/16". 2. The line from the vapor separator to the metal line is 1/4" 3. The line from the filler neck to the top of the tank is 1/2" 4. The return line on the side of the tank is...
Back
Top Bottom