yotadude520

400 miles on a set of Terrain Tamer parabolic leaf springs, front & rear springs. Just the leaf springs available, no bushings, no shackles, ect. Be aware, I don’t BS people, these are not what everyone is saying they are. They are designed to...

Save the planet's water, fossil fuel energy, and RAM prices and just do a standard Google search. Many threads on this exact issue you describe pop up in half a second with a standard search. These vehicles are highly complicated and technical...

this has helped me fix about 90% of my problems not self inflicted on my truck haha https://forum.ih8mud.com/resources/1984-1990-repair-manual-chassis-body.1/

I'm a big fan of how my truck rides with the OME setup I got from Cruiser Outfitters. I've installed the Dobinson stuff and it was ok, seemed to be a little bouncier than my OME stuff. I've also heard their customer service wasn't the greatest...

You gotta change your tampon, hater. This is an enablement group, get with the program.

San Rafael Valley

@yotadude520 Let's see how this plays out!!!

Made some headway over the last 48 hours. What a messy job, but we got it done.... There's something strange about pulling a vehicle into the shop knowing its the last time it will ever drive. Its way different than just buying a motor...

You definitely have enough lift for high steer. Sounds like you got a set of FROR keyed arms, that’s the best setup out there IMO. Definitely do not turn the pins down to the run the stock trunions, the 25mm bearings are way stronger/better. I...

Hello all! I just picked up this beautiful 1987 Land Cruiser! I love the tan paint and brown interior! Details on the rig: Original owner (I'm the second now...) California car Absolutely no rust!! Garage kept Manual transmission 72k...

The information you seek is all in this forum as this as has been documented on several builds over the last 15years, but the short answer (and best setup, in my opinion) as of 2026 is to use all 00-06 GM parts, including bellhousing and internal...

God that’s still such an amazing cruiser.

Title: 1997 Toyota Land Cruiser (FZJ80) - Built, Refined & Trail-Ready (410K Miles / ARB Lockers / Slee Lift / RCV Axles) Price: $15,000 or best offer. Will not go lower than $12K Description: Up for sale is a thoughtfully built, highly capable...

use a Dragy and measure actual stopping distance from 60mph instead of just how you feel. And if you do want to upgrade the fronts you can have the exact same performance as that $3270 kit for 1/3 of the cost with 00-06 Tundra rotors/calipers...

Here is the PCB in the enclosure, not yet potted. Clear soldermask on the boards make them look funny/cool. Wired in for testing. Low voltage setting has alternator output accordingly. Cranked up, gets around 15-15.2v Next steps...

I started this project with a web search. I figured that these trucks must have a Class III hitch available on the aftermarket somewhere... and got several hits in Australia. Shipping something this heavy was going to cost an arm and a leg... but...

This was my first thought. The PCM with the IAC pins can be used on both dbw and dbc, but the pcm without the iac pins can only be used on dbw. Even further. Sometimes these old PCMs are just effed up. I was having issues on the last ls swap i...

Today I got the transmission out, clutch and pressure plate off, Split the transfer case to start putting in the sumo gears, and I dropped the rear driveshaft off at the shop to be shortened. I had to remove the rear driveshaft with a prybar and...

Idle air control valve - basically an electronic valve that mounts in the throttle body that allows a controlled amount of air into the TB. Without it the truck won't idle unless you make other adjustments on the TB. If your ECU doesn't have...

No idea, 2002 was a weird transition year. I got lucky with mine being an 03 having the IAC pins even though it originally came with a DBW setup.

Open it up and make sure it has the pins like mine did. That's the best way to verify.

Did you make sure that the ECU you have is compatible with a DBC setup? You can read more on what to look for below: https://forum.ih8mud.com/threads/stumbling-my-way-through-an-ls-swap.1342975/page-2#post-15581557

You have a lift? You have it on easy mode, man! :D

You can try Willie Armenta at Tint Masters Tucson, he did a great job on my FJ60. (520) 912-9339

Another reason to work on your own truck