I have a 71 with a 69 carb and just having troubles - I have rebuilt this carb and can get it running pretty good but want to get it running better - The carb I have is the 3/69 to 9/69
I'm looking at buying a rebuilt carb and can see some...
Is the float different for this carb than say a 1970 carb - I have this carb but cannot find this float - The ones I have have the medal tab in the middle of the float not at the bottom
You guys are making me feel old!
Not a Cruiser pic, but here is my '73(?) F-250 that I just drove across the Dewey Bridge northeast of Moab, circa 1978:
I have a 69 Carb and after many adjustments I have found apparently due to the seating the needle needs to be a solid needle for the float cut off - Apparently the needle with the spring can cause issues such as what I have experienced
Below is...
That's the same carb from what I can tell - Your picture is what I was looking for
I have rebuilt and re-adjusted the float many times
The float on this one (mine at least )if adjusted to the recommended 6mm gap will allow too much fuel in so...
I have looked for about an hour on line to see if I can see that part in a picture on my 03/69-09/69 carb and I can’t find a picture anywhere seems it is always blocked in a picture
Maybe someone has a picture they could post of that part
I...
Engine up and going
We bought this from the second owner who bought it 1973
Spent a better part of the day with him and he believes it has about 110,000 miles on it. Not sure if that’s true. I don’t have any real verification other than his...
Here is a couple of our 71 FJ 55
have it running and driving very well!
Rebuilt the carb while my wife cooked dinner - It has the wacky 1969 carb that has been interesting
Off for full rust repair and paint in a couple weeks
Still have new...
I have the 1969 Carb that was manufactured for 6 months - So far it seems I'm missing this linkage - Does anyone have one or any ideas on who may have one?
Super didn’t know they had one
Thanks red line is great have talked to Justin and his crew several times
Lots of help even got a tour of his shops sweet rigs down there
Took the vent down and plugged it with JB
Thought I would try this before I buy the Spector 100.00 spacer for the 69
After the rebuild and plugging the vent
Runs great
Hello, not sure why my spacer doesn’t work, but if I flip it over the way, Martin shows it it hits the bolt for the main jet
It’s not bent incorrectly from what I can see
The vent on Martin spacer looks like it might be coming straight out from...
Take a look at my picture when I flip the spacer, it hits the area with the bolt
The spacer that I have will only work if I cut the vent which I have done and sealed that up
Truck now runs very well so far just dealing with my air filter, not...
I have a 69 carb on my 55 and its a 71 - It seems the air filter does not reach - My carb was only made for 6 months so I think I need a spacer or a different Air Cleaner Housing - I found a picture on BAT of my carb and a bit different Air...