Does anyone know the pinout for a 1998 US spec Land Cruiser 100? After the battery died none of my keys are recognized by the immobilizer. I swapped ECU with my 2000 Lexus LX 470 and it will start right up(with Lexus key beside ignition cylinder). All the videos on the internet say to jumper pin 4 and 13 on the OBD2 port to reset, but the 1998 only has 4 wires, and no pin #4. It does have a pin 13 though, so I'm not sure how to jumper it for the reset with #4 not there. I do have techstream, and it will not communicate with the ECU or Immobilizer to reset that way. Any help is appreciated