- Vehicle Model
- 100 Series
- LX470
- 200 Series
- LX570
- Tundra
- Sequoia
- Location
- Massachusetts United States
For sale in the Boston area, set of 5 wheels/tires, with TPMS and spidertrax 1.25in spacers (4) $1200 OBO, prefer local pickup.
Wheels are the tundra 18x8 bullet hole style steel wheels, 5 total, purchased from Hub Cap Haven and re-powercoated in black. These are et60 wheels so they will work quite well for 200 series landcruisers in particular but will fit anything with a 5x150 lug pattern. (Link to original wheel purchase: STL69512U Toyota Tundra Wheel/Rim Steel #426010C030 - https://www.hubcaphaven.com/p/4908/stl69512-toyota-tundra-wheel-steel-426010c060.html)
Tires are BFG KO2 275/70/18 E-load rated, with approximately 30k miles on them. The fifth tire (spare) has not been used. (Link to tires: https://www.tirerack.com/tires/tire...KO2RWLV2&vehicleSearch=false&fromCompare1=yes)
TPMS were purchased from the Toyota dealership and can be reprogrammed to work with a 200 series. These may work with other models but I’m not entirely sure.
I also have the grey/Slee Spidertrax spacers that I used with this set of wheels if those are of interest. Willing to break these out and sell separately, please message me.
(Link to spacers: https://sleeoffroad.com/products/stf1079/)
Overall the wheels, tires, powdercoating, TPMS, and spacers cost around $4K if you were to buy everything new today. This would be a great set for winter wheels or wheeling or you could run them 24x7 as I’ve done for a few seasons.
Wheels are overall in great condition but there are two cosmetic blemishes:
1. The spare wheel has some surface rust, which is common in the northeast for a steel wheel mounted below a vehicle
2. One of the wheels has a small bit of curb rash, shown in images with coin for reference.
The tires are also in overall great shape, no plugs, patches, punctures, or issues. There is one tire that has a superficial scrape that I have noted in the images. Per the dealership this is cosmetic and does not warrant remediation.
Wheels are the tundra 18x8 bullet hole style steel wheels, 5 total, purchased from Hub Cap Haven and re-powercoated in black. These are et60 wheels so they will work quite well for 200 series landcruisers in particular but will fit anything with a 5x150 lug pattern. (Link to original wheel purchase: STL69512U Toyota Tundra Wheel/Rim Steel #426010C030 - https://www.hubcaphaven.com/p/4908/stl69512-toyota-tundra-wheel-steel-426010c060.html)
Tires are BFG KO2 275/70/18 E-load rated, with approximately 30k miles on them. The fifth tire (spare) has not been used. (Link to tires: https://www.tirerack.com/tires/tire...KO2RWLV2&vehicleSearch=false&fromCompare1=yes)
TPMS were purchased from the Toyota dealership and can be reprogrammed to work with a 200 series. These may work with other models but I’m not entirely sure.
I also have the grey/Slee Spidertrax spacers that I used with this set of wheels if those are of interest. Willing to break these out and sell separately, please message me.
(Link to spacers: https://sleeoffroad.com/products/stf1079/)
Overall the wheels, tires, powdercoating, TPMS, and spacers cost around $4K if you were to buy everything new today. This would be a great set for winter wheels or wheeling or you could run them 24x7 as I’ve done for a few seasons.
Wheels are overall in great condition but there are two cosmetic blemishes:
1. The spare wheel has some surface rust, which is common in the northeast for a steel wheel mounted below a vehicle
2. One of the wheels has a small bit of curb rash, shown in images with coin for reference.
The tires are also in overall great shape, no plugs, patches, punctures, or issues. There is one tire that has a superficial scrape that I have noted in the images. Per the dealership this is cosmetic and does not warrant remediation.