200 Series with TJM T13 - Winch Options? (5 Viewers)

[LCHardriver_02]

So, my '18 200 series came to me with a TJM T13 winch bumper and I'm now thinking of getting a winch for it but I have not been very successful in finding options / mounting limitations that I need to consider for my winch selection. Note that I am no longer doing "hard core" wheeling but I do occasionally find myself alone out in mud or snow and back trails in Idaho, so having a good winch that does not break the bank is what I am looking at without dropping $1500 - $2500 on a "top tier" winch that will just sit 99% of the time in the bumper's cradle. Any suggestions on ones I should look at that will fit this installation would be appreciated. Note that I am thinking synthetic rope vs. steel.

Pic for attention.

 

[gnob]

give you an idea of their recommended dimensions

 

[LCHardriver_02]

Thanks. I will have to do some homework to see what my options are out there.

 

[jsnow]

It may be more expensive than what you are looking to spend but you could check out the Comeup DV-12S Lite

DV-12s LITE 12V

Part Number 850112 Line Speed and Amp. Draw (1st layer of wire rope on the drum): Line Pull,kg / lb Line Speed,mpm / fpm Amp. Draw, A No load 8.3 / 26.9 50 1,814 / 4,000 3.1 / 10.2 120 3,629 / 8,000 1.6 / 5.1 230 4,536 / 10,000 1.2 / 4.0 290 5,443 / 12,000 1.0 / 3.3 350 Line Pull and Rope...

comeupusa.shop

 

[clrussell]

I have a warn ev0 12k in mine. Zero fitment issues. Bolted it in and done. Was about $1000

 

[LCHardriver_02]

I have a warn ev0 12k in mine. Zero fitment issues. Bolted it in and done. Was about $1000

That's great to hear! Thanks a ton!

 

[LCHardriver_02]

Both winches are in stock in our California warehouse.
View attachment 3551386View attachment 3551387

Thanks! I'll look into that 12K winch. It's right in the right price range for what I was thinking.