@Racer65
Racer-X is truly a original professional mechanical TEq Artisan .... 👨🎨
,
- take note of the 3-mini-rubber-motor-mounts he has between the 3 feet and the sheet metal base , secured with the OEM-Period Correct concave-cupped fender...
Saw some snow and wheeled around to some hot springs. Otherwise I had a buddy whip up some accelerator stop pins, good for 70-90 two barrel F/2F/3F carbs which has been great. Lastly….still looking for these brackets below if anyone has clean ones.
Sooo....
right now the transfer case has a low gear of 2.62:1. Let me present 4:1
and very stout
of course, the 'coming soon' is pulling the t-case and pulling it completely apart, then doing a bit of machining then put it all back together...
the hope with the hydro assist was to reduce the flex at the box.
That said, I'll say it again. Even with the box flexing, it was stable at speed before I put the hydro assist on it. Truly a plot twist.
New toys from Toyota. I’ve just installed my gear reduction starter. I ordered it off of a 86 Land Cruiser. It goes in no problem! But I have an extra connector..? The previous one (a Napa power supreme) worked pretty good without it and ok when...
I think cowboy just wants to drive and be driven. I had found the 2 leaks (break and radiator) so I put him in the garage and started looking into problems and possible fixes and parts. Then about a week or so ago I had a hankering to drive him...
One step forward one step back. I fixed the brake master cylinder leak, but now it’s leaking out of the driver side rear brake cylinder. And now as I am rebuilding the front steering arm bracket, I see I have a radiator leak! At least I am seeing...
Replaced the radiator! I bled the old one with its butterfly style relief valve. Then took it out. It was pretty heavy compared to the new one. While it was out I painted up the radiator support. Then I put the relief valve that Toyota gave me...
With the help of a friend and a new ignition cable from @ToyotaMatt my cruiser is starting like it’s a new car!!
My friend and I spent an afternoon checking wires and power to all of the ignition and charging systems. We tracked it down to the...