Ok this is odd... I placed the truck in service mode, properly jumping e1 and te1, confirmed by the binking CEL on the dash, then re-set timing to 3*. Shut the truck off and removed jumper, and re-started. Timing remained at 3*... I re-set jumper...
Oh I'm fully aware of the need to regear. I've got a built t case with the 10% over and under drive gears, a set of rci axles and manual hubs sitting on the shelf waiting for install. Just saving up for the f/r diff gears. I'm not suggesting I...
And come to think of it, when I had the rig baselined at Valley Hybrids, they replaced the distributor and cap, so I'm confident they had the timing set for ideal power/efficiency.
Smog is the worst. 🙄
Thanks for the input. After reading this thread that was my first thought, that they didn't jump the pins... so I placed a call the very next morning... I spoke to the tech and even before I mentioned the pins he cut me off and said "and yes I...
Gonna bump an older thread here... regarding timing. I recently had to smog my 94, and while it passed emissions, evap etc. the tech came back and said he failed it because the timing was set at 15*
He set it back to the factory recommended 3*...
FOR SALE: complete OEM roof rack from my '94. Mounting bolts included. Condition is good, just sun faded from years of being a roof rack.
Located in Penngrove, Sonoma County, NorCal.
$50.
Scored this sweet ARB rack off a mudder. It's powder coated a cool gunmetal gray and has a tray up front. I wasn't originally going to run a roof rack but this was a killer deal, plus with the family of 4 and a doggo, interior space is at a premium.
Welp... got the smoke machine and put it to work, but couldn't find any leaks! I used the gas cap adapter and charged the tank, nothing... I pulled the hoses off the evap canister and tested both sides of each... nothing!
Any other lines or...
Have you had a bad run with Coopers? These are my first Cooper MT. I've had their discoverer AT's on my old Tacoma a few times and they were great. I've always been a Goodyear MT-R Kevlar fan when it came to the muds. But these were a pretty...
before and after installed the LT 275/65/18 general grabber atx’s today
i only removed the infamous bolt from the fender liner and got away with no rubbing from lock to lock so far
Make or rent a smoke machine and hook it up to the hose connected to charcoal canister. When mine failed it actually just ended up being a loose hose clamp on one of the lines to the canister. Once I tightened it I passed.
Hey Mud,
Looking for bit of assistance here. Took my 94 in for smog and it passed everything EXCEPT the Fuel Evaporative Controls Functional test. Tech explained that they pressurize the tank and if it leaks a certain amount then it fails. Says...
For sale:
Pair of stock radius arms off my 94 FZJ80. Good condition. 180k miles. Bushings look like they have life left in em. No issues, pulled them for the Delta Arms.
$50.00
Located in Penngrove, CA 94951
Not really interested in shipping...
Delta 5L arms are in! Install was a piece of cake... little ratchet strap action to pull the axle forward and a little wiggling to get the hole lined up and they were in there! Have to wait till next week to get the alignment numbers but it...