Your List for 2011/12

[89s rule]

Marshall - do we still own a bender?

From what i remember, there was a decent amount of people that wanted to do a slider HAMOM.

Ive been trying to get one of those together for years (Bender HAMOM). Basically someone to show how to use it and we all get together and build stuff. I need sliders and a rear bumper for the truck and a front bumper for the 80. (Dont mind experimenting on the pickup.

 

[dohcdelsol93]

i've still got tons of tubing from where i had to take apart the damaged trampoline.

If you guys want it you can have it.

We closed on a new house last friday and anything that we don't "need" will be thrown out.

 

[scott johnson]

Get "new motor" in
install new brake boster
Clean up the 40 (been sitting a while)
Drive the 40!!!!!
fix the bent steering rod that goes from the box to the bell crank
fix leaking rear diff
fix the rust on front of hood
build new license plate bracket on spare
get a MT stinger / nose gaurd
mount my new to me trail tires on the rims I'm getting from Belmont
install a dash bar into roll cage
work on rear rock slider project
remove "hoods" from dash lights

I'm sure I'll think of more!

 

[ff347]

In no particular order
tre's
water pump/hoses/belts
desmog
exhaust system
repair rust in qtr panels
hdpe panels in cargo area and tailgate
rear cargo box
herculiner/duraliner/durabak

 

[Rooskey]

Restore interior---all most done just have to mount center console.
Find a teardrop trailer and modify it for some trail action.
Find some peeps to do some weekend overnight trail riding camping trips

 

[scott johnson]

For those of you wanting to do spray in bed liner you might want to check out these guys. I think I'm going with this when I get some of the more pressing maters taken care of. Alot of the guys on the main mud page gave really good reviews of this stuff. Looks really good and you can tint it to match your color if you want.

http://www.tptools.com/p/2600,233_U-Pol-Raptor-Spray-On-Truck-Bed-Liner-Kit.htmlve

 

[Carp]

In no particular order
tre's
water pump/hoses/belts
desmog
exhaust system
repair rust in qtr panels
hdpe panels in cargo area and tailgate
rear cargo box
herculiner/duraliner/durabak

Let me know when you do the panels, I'm going to be ready for something soon. Also, looked at the Raptor Kit posted by Scott Johnson, might be a good deal for the back of 2 60's. We could probably split a kit, I'm looking at the tintable one so I can do a dark grey to match the carpet.

 

[BMThiker]

For those of you wanting to do spray in bed liner you might want to check out these guys. I think I'm going with this when I get some of the more pressing maters taken care of. Alot of the guys on the main mud page gave really good reviews of this stuff. Looks really good and you can tint it to match your color if you want.

http://www.tptools.com/p/2600,233_U-Pol-Raptor-Spray-On-Truck-Bed-Liner-Kit.htmlve

your link has some extra letters at the end and didn't work. fixed it.

U-Pol Raptor Spray-On Truck Bed Liner Kit - TP Tools & Equipment

 

[IndianDoc]

To Do Someday

Get rid of the vibration and shimmy (it's better but still there)
Reinstall the sliders
purchase and install the battey isolater
install the new winch
install the skid plate
start on the interior lighting and roll cage
finish working out the tunning bugs from the weber install
get some time just to be able to drive the thing much less wheel it.
try not to die!!! like Marshall said
Oh yeah Wheel it more often!!!!!

 

[seaduck66]

Purchase and install a Metal Tech full family cage.
Locate some donor doors so I can fab some hard half doors
Drive the 40 more often.

 

[99UZJay]

Sell the 40... Buy a 60... Drive said 60...

 

[dohcdelsol93]

drive the entire year without needing any repairs.

 

[Southeast Overland]

Sell the 40... Buy a 60... Drive said 60...

You buy and sell more than anyone I know. You are worse than Dan!

 

[NCFJ]

I am just beginning my 82 FJ60 project-Godzilla. Named by Heather for the color and the crazy noises the air pump was making.

Working on patching all the holes on the roof above the drip rail. Got the back pretty much done and a lot of the drivers side as well.

Already done:New motor mounts
Complete tune up
Trollhole carb dialed in
Complete degrease of driveline

This year:Complete patching all cancer found-cutting out and patching in new metal
Lockers and new gears front and rear
New dash cover-Done https://forum.ih8mud.com/60-series-wagons/483019-dash-rehab.html
Volvo front seats-heated
Re cover rear seat to match new Volvo seats
New door panels and rear panels-Seaboard
Radio and CB
Locking throttle cable-done, pretty cool easy addition
Front bumper done
Rear bumper done
Sliders
Roof rack

Long term:
Move up to 35s
4 link rear, 3 link front, maybe 80 axles
Paint

 

[99UZJay]

You buy and sell more than anyone I know. You are worse than Dan!

Who is Dan? I'm more in Anestis' league...

 

[the gimpey one]

drive the entire year without needing any repairs.

lol if u had it like he does you could rock it like that as well!

 

[Southeast Overland]

Who is Dan? I'm more in Anestis' league...

You have so much to learn little grasshoppa'.

 

[scott johnson]

your link has some extra letters at the end and didn't work. fixed it.

U-Pol Raptor Spray-On Truck Bed Liner Kit - TP Tools & Equipment

sorry, got carried away with the cut and paste

 

[BMThiker]

Short term goals:
[STRIKE]swap in a new CV axle, for the spare I'm currently running
finish welding on new alignment tabs
finish replumbing the air compressor system
finish wiring the air horns[/STRIKE] [correction]
sand and paint the primered dings/chips
run bigger gauge wire to my fridge, eliminate the cig plug

Long term goals:
replace my trans/tcase skid with thicker, but smaller area of steel
add kickouts to my sliders
3-link the rear

So who has made progress on their lists?
I'm adding secondary battery to my list too.

 

[jleeFJ62]

Stole this from ONSC.

What's on your list to do on your cruiser for the rest of this year and next?

For my 62:

[STRIKE]
install sliders and rear bumper
[/STRIKE]
desmog
new tre's
new O2 sensors
new exhaust
redo the front end alignment to get rid of toe in
rear main seal
new rear drum's
probably alot of other stuff that i can't remember i need to do

Main reason for this thread is that we can use this to schedule HAMOM's. If we can get enough people doing the same thing, we can have a super hamom, similiar the front axle rebuilds we do. Plus, people who've already done alot of these jobs can help with some advice to those who are about to tackle them.

New things:
Rear Pinion Seal
Install rear locker

Alot of the stuff on there has been put on the backburner. Nothing that is in need of being done, but would still like to do it down the road.