Wiring Harness

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 9, 2010
Threads
115
Messages
662
Location
San Tan Valley Arizona
I am putting a Chevy 350 in my 74 FJ40 and was wondering what wiring harness to use. The original wiring harness is shot and needs to be replaced. Where is a good place to get one and do I need a Landcruiser wiring harness or a Chevy 350 wiring harness?:popcorn:
 
Just finished getting a American Autowire Hwy 21 kit installed in my 40.

They make a HWY15 kit also....went with 21 so if in the future I went fuel injection or TBI.

Installer good buddy, said it was cake.... like took him 3 days taking his time.

My 72 FJ40 specs: chevy 327/ turbo 400/ orion:cheers:
 
the aftermarket harnesses are pretty much generic for US vehicles anyway - so yeah, likely they'll work just fine
 
Thanks for the wiring input. I am also debating having a keyless ignition put in to deter would be thieves. What I was thinking was a ignition on/off switch then push button start. I also want to put in a fuel shut off switch. Has anyone done this before.
 
Thanks for the wiring input. I am also debating having a keyless ignition put in to deter would be thieves. What I was thinking was a ignition on/off switch then push button start. I also want to put in a fuel shut off switch. Has anyone done this before.
Yes. You really have to pump the gas to get it started, then run the risk of flooding the carburator. It's kind of a pain, but it's nice to have the added protection. You could also go with a separate switch to the starter motor. It's ok, but I feel it's a little rough on the starter.
 
Back
Top Bottom