winch install...should the rollers be centered

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Jim,

I have an extra winch bumper for the 8274, like the ones all the carriers have for sale. Let me know if you want to start with something like that.

FWIW, the 8274 usually sits to the passenger side so the fairlead is centered.

Here is a shot of mine, although I have lopped off the ends for better approach. I have one that is full lengtht that I was going to switch over to.

Rezarf <><
 
REZARF said:
Jim,

I have an extra winch bumper for the 8274, like the ones all the carriers have for sale. Let me know if you want to start with something like that.

FWIW, the 8274 usually sits to the passenger side so the fairlead is centered.

Here is a shot of mine, although I have lopped off the ends for better approach. I have one that is full lengtht that I was going to switch over to.

Rezarf <><

i'm good drew, thanx for the offer.<><

nice pic to drew :doh:

i'm cuttin the bumper tonight and hopefully have it all welded up by monday.
stinger,front end hoop,bumper and winch.

will post up on monday ;)
 
i also centered the fairlead , to make it look centered better you also need to make a bigger mounting plate ,i made mine go from framerail to framerail need to make the bumper look the same on both sides all everybody really looks at is the bumper and the fairlead ,most don't even notice the winch is not centered
IMG_0250 (Small).webp
 
I have the same winch.

Winch is centered rollers are not.

I did the reversible mod from pirate. It works fine, but you must be sure your hand brake works well, I've already fawked one armature by letting the cable wind out with the motor engaged. (spins the armature so fast the windings come out)

Below: Upper 2 at tellico this past weekend.
CIMG0015 (Small).webp
 
bumper build update

so i did some cuttin and welding on my winch bumper.

i'm very pleased they way it came out.
it will mount in front of the frame rails and between the original mounting plates.
i still need to put a taper at the ends so it looks clean.
this is as far as i got.
DSC00662.webp
DSC00663.webp
DSC00664.webp
 
Jim-

looks SWEET! I really really like it, your welds look killer, what kind of welder are you using?

Rezarf <><
 
That is looking really nice Jim.

Are you planning on bracing the stinger? It looks beefy as it sits now, just wondering.

Nice looking stuff bud!

Rezarf <><
 
REZARF said:
That is looking really nice Jim.

Are you planning on bracing the stinger? It looks beefy as it sits now, just wondering.

Nice looking stuff bud!

Rezarf <><


yup,yup!

next is the front hoop for the hood and bib that we bent at ians, they will be tied into each other...
 
Jim-

That looks really nice, did you bend that up hoop out at Ians or is it a metal tech one?

Looking sweet man, we need to talk sliders before too long... like Moab too long.

Drew <><
 
2badfjs said:
yup,yup!

next is the front hoop for the hood and bib that we bent at ians, they will be tied into each other...


oops, I just read this :D

Drew
 
Back
Top Bottom