Who is running Longfields??

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 21, 2004
Threads
374
Messages
5,499
Location
San Diego
Website
youtube.com
Who here is running Longs in the front of their 80??

Did you have to grind any material away from the inside of the axle housing to clear it?

Thanks
 
I am running them...work great, OEM fit. No problems with several thousand miles of what I would call "abusive" use :)
 
I think Bobby offers short and long spline 80 series longfields now, so you can specify which you need when you order (just give them the year).

Earlier model 80s have shorter outer splines than later model 80s...the only difference in using either is the outer drive flange on the hub.
 
I think Bobby offers short and long spline 80 series longfields now, so you can specify which you need when you order (just give them the year).

Earlier model 80s have shorter outer splines than later model 80s...the only difference in using either is the outer drive flange on the hub.

Well, i got a 93 and my drive flanges are toast anyway! :D
 
There ya go...you can even order later model drive flanges and retro fit your truck, then run the longer splined later model birfs if you are so inclined!
 
i dont know which ones i have, the flanges appear to fit fine

what am i looking for? splines too long for the cap to fit?

Thanks
 
ummm, if you have stock birfields and drive flanges you have short.

If you had the longer spline birfields with an older flange you would see the c-clip floating out and exposing more spline.
 
ummm, if you have stock birfields and drive flanges you have short.

If you had the longer spline birfields with an older flange you would see the c-clip floating out and exposing more spline.

i dont think i am following ya
 
Okay...all the outer drive flanges fit on the hub in all years...so that is a non-issue. The birfield installed with a mixed flange year is the problem.

What I am saying is that if you had original birfields with original outer drive flanges...you have the short birfields. If you got new birfields (for a later model 80) you would install the birfields and see more spline between the flange and the circlip that you use to retain the birfield at the outer flange.

So, if you want to use later model birfields (with more spline = stronger) you have to order up some later model drive flanges. If you keep using earlier model (shorter) birfields...no worries.
 
Back
Top Bottom