which GM steering column to use

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

this link may help you https://forum.ih8mud.com/40-55-series-tech/420446-gm-tilt-column.html i dont know about the impala column but i dont see why it would not work.

use the search function above under the twitter facebook links and search chevy column or gm column or tilt column and you will find more info then i have the time to post links to. good luck!
 
What's the length on the Impala column? I can take a quick measurement from my s10 column to compare it. I bet it's in the ball park and you should be able to use it.
 
90 -94 Chevy/GM P/U columns work great. They have 1"DD shaft to accept Borgeson universals and have solid tube construction (no collapsible mesh). They extend from the dash to almost the stock steering wheel location. Just a thought.
 
I got tired of looking for one at the pick and pull that was not trashed, broken or abused, so I went with this:
Summit Racing SUM-770702B - Summit Racing® Floor Shift Steering Columns - Overview - SummitRacing.com

However, it does not have an ignition key or shifter. Used borgeson joints and sector shaft to connect to the saginaw box.
HPIM1604.webp
 
I used a new 28" tilt steering similar to flaming river or ididit. Had a 32" that was given to me and it was way too long. Since I have a 71, the key is on the dash. Went together pretty well. Used a Borgeson Universal Steering Universal Joint Steel 1" DD 11/16" 36-Spline to get into the Mini truck PS box I added. I also added a Speedway Universal Steering Column Mount to connect to the firewall. That was mounted to the exterior of the firewall so I could reuse the factory seal rings on the interior.

20170305_122157.webp


20161124_172641.webp
 
Back
Top Bottom