What's wrong with this picture?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 1, 2010
Threads
9
Messages
106
I've done the service on the front end at least 6 time's this is a first. What's wrong her?

IMG_20210115_183318725.webp
 
What is the question? Reversed knuckle?
Ding ding ding! Can't believe I did this. It never occurred to me that this could happen. Had a help for my 11 year old son I'm not used to having a helper and didn't double check his organization of the parts. It only sets me back about an hour and a half. 🤪
 
I think the funniest part about this thread is I swore when I opened it, it was an old thread. Somewhere here in the archives some guy that knows 80's well and has done the same rebuild 100's of times did the EXACT same thing.
 
I think the funniest part about this thread is I swore when I opened it, it was an old thread. Somewhere here in the archives some guy that knows 80's well and has done the same rebuild 100's of times did the EXACT same thing.
It's nice to think I'm not the only one. I just don't know if I believe it. 😀
 
Did I mention I did both knuckles. I didn't realize I made the mistake until I installed the passenger spindle. To mine and my son's defense it is a lot of parts to keep straight.

IMG_20210109_145301601.webp
 
That one puny made-in-chyna Jack stand makes me a bit uncomfortable.

Previous discussion (2009) on a Jack stand that failed:

 
That one puny made-in-chyna Jack stand makes me a bit uncomfortable.

Previous discussion (2009) on a Jack stand that failed:

Correct me if I'm wrong but I don't think acdelco is under the harbor freight recall.
 
Back
Top Bottom