What have you done to your 100 Series this week? (37 Viewers)

[Rotheeno]

As some of you may recall my house mate's pet pigs ripped the rear bumper off the 105 a few months ago.... but the good news is a replacement arrived on a a ship to the Island last week. I'll fit it soon.

Probably.



On Sunday we thought we'd test the newish Rola roof tray with some wild barbecue ingredients. It's a good rack and seems fairly corrosion resistant.

View attachment 2821493

I had to google your location. Wow that's remote. Cheers from the other side (North Cape, Norway)

 

[Africaster]

Rear Nakamichi Speakers on my ‘00 LX replaced after the HU. 6.5” GX628 JBLs. Trimmed the stock enclosure with a dremel grinding bit to get these in.

Working on the front with 6.5” GX608C component speakers along with the amp soon.

was this a straight swop or does it require additional amp-related “stuff” before working? Appreciated

 

[OwnerCS]

Big things coming this weekend!

View attachment 2823762


View attachment 2823763

LX - no need to cut off the light tabs. Just change the pitch on the grille to clear them.

This might come in handy.

If you have an issue clearing the light tabs.

 

[DIFF LOCK]

This might come in handy.

View attachment 2824310

Is there a chart like this for the Land Cruiser? I still have yet to wire up my LED bumper lights on my Ironman 4x4 classic off road bumper.

 

[MysteryMachine]

View attachment 2823944
Built the most basic of platforms so I can go camping this winter in FL

I did the same

 

[OwnerCS]

Is there a chart like this for the Land Cruiser? I still have yet to wire up my LED bumper lights on my Ironman 4x4 classic off road bumper.

I haven't seen one. It would be nice if we had wiring maps for all models and bumpers.

 

[213374U]

LX - no need to cut off the light tabs. Just change the pitch on the grille to clear them.

This might come in handy.

View attachment 2824310

If you have an issue clearing the light tabs.

View attachment 2824311


View attachment 2824312

Huge help, thank you! Are there any more detailed writeups out there on changing the angle of the grill? Is it just adding washers and changing that lower mounting point?

 

[harrydunn]

Back to the Leadville area. It’s changed a lot in the 25 days since I was out here!

 

[changingground]

Back to the Leadville area. It’s changed a lot in the 25 days since I was out here!

View attachment 2824714View attachment 2824715View attachment 2824716

Wow! Headed over to Beaver Creek tomorrow. Wasn‘t anticipating this much change.

 

[yj668]

was this a straight swop or does it require additional amp-related “stuff” before working? Appreciated

Straight swap with factory wiring for the rears, I tend to keep the volume pretty low so the stock amp would do for now without blowing up until I get the amp replaced.

For the front factory speakers, it uses a splitter connection so half of each signal goes into the woofer and tweeter. If you used component speakers, you’d have to cut and splice at the splitter containing 3 positive, 3 negatives ( 1 input 2 outputs each ). You’d wire the single inputs to your crossover and route them to the tweeters and woofers.

This video works as a good general guide.

 

[daohaus]

Almost finished just need to add stickers to the thing and clear coat the paint. This needs a lift since i believe the AHC it’s busted

 

[Eyedaho]

Almost finished just need to add stickers to the thing and clear coat the paint. This needs a lift since i believe the AHC it’s busted

View attachment 2824856

View attachment 2824857

View attachment 2824858

AHC is a superior suspension system and you'll regret it forever if you remove it! Just fix it!

 

[daohaus]

AHC is a superior suspension system and you'll regret it forever if you remove it! Just fix it!

Bahahhaha

 

[SNLC]

Just a couple of 1HDFTE’s that we are building. *cough* HDJ100 engine *cough*

100% pure Toyota Land Cruiser diesel sexiness!

Cheers

*yes I am spamming the forum with these, why not!? Best Toyota turbo diesel ever built, arguably. And fits oh so well in 40 to 100-series!

Cheers

 

[ClassyJalopy]

Just a couple of 1HDFTE’s that we are building. *cough* HDJ100 engine *cough*

View attachment 2824866View attachment 2824867View attachment 2824868View attachment 2824869View attachment 2824870



100% pure Toyota Land Cruiser diesel sexiness!

Cheers

*yes I am spamming the forum with these, why not!? Best Toyota turbo diesel ever built, arguably. And fits oh so well in 40 to 100-series!

Cheers

Build a 1VD-FTV next.

 

[clrussell]

Big upgrades in small packages. New loncky steering wheel cover installed.

 

[100d ua]

After a year of having the brackets installed I finally drilled the holes and secured them with the hardware. I guess I don’t wheel hard enough, because nothing broke :-(

Also reinstalled my front drive shaft. Gonna be honest, I really like the way it drives without a front shaft. So smooth and no clunking lol.

 

[daohaus]

Big upgrades in small packages. New loncky steering wheel cover installed.

View attachment 2825789

View attachment 2825790

View attachment 2825791

View attachment 2825792

I’ve been wanting to do this but can’t figure out what color to order for my interior

 

[100d ua]

I’ve been wanting to do this but can’t figure out what color to order for my interior

I'm also on the fence about this. I have the nasty beige interior but I don't think it would make sense to add the grey / black to a beige interior.

 

[daohaus]

I'm also on the fence about this. I have the nasty beige interior but I don't think it would make sense to add the grey / black to a beige interior.

Yup my interior is beige, dashboard I think is grey with it being as old as it is I'm not sure if it's really grey lol. I wanted to buy that spray paint to cover the west marks from elbow on the driver side but again not sure WTH color is supposed to be