What am I missing

[TN78FJ40]

Finally installing carb since removing 7 months ago and cannot find a pic that shows what i am missing. This is the linkage for accelerator from carb to bracket on firewall. Is there a nut or rubber grommet that goes into the bracket to hold linkage in place?

 

[charliemeyer007]

Year/model/market helps find a proper answer. These days there is no excuse for taking tons of pic's or vids before/during disassembly.

Look in the proper manual
free downloads

Land Cruiser Factory Service Manuals (FSMs)

Factory service manuals (FSMs) for your Toyota Land Cruiser ! From the 1950s to the present!

www.cruisercult.com

 

[CruiserInProgress]

I found this pic (not mine) helpful when resurrecting the linkage on my 79 a couple years ago.

Linkage components are readily available from various sources here.

 

[TN78FJ40]

Thanks Cruiser. Yes, my 78 FJ40 is a little different. I've searched my Haynes manual and looked through countless images and posts but couldn't find a clear answer. All images I found looks like yours. I have pics of the carb, but not of the linkage, lesson learned. I appreciate people like you who actually want to help. Thanks again.

 

[brian]

That linkage has been hacked.
There appears to be a socket head cap screw welded on the end.

 

[timmyisinthewell]

I know the picture quality isn't the best (dang 50 year old tech) and it's very busy, but you may be able to see what, if anything, you are missing. Best of luck with your project.

 

[sogafarm]

Vintage Teq sells a kit

 

[nabbasi]

Here is another angle, showing some of the parts (not on the firewall yet), and then the mostly installed version.

If you post up in the classifieds, someone has one lying around I’m sure.