welded diffs

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 18, 2003
Threads
56
Messages
107
Location
South Hadley mass
pro's and cons' of weleded rear ends. puttinga power trac up front and was debating about welding the rear. around town and wheeling no highway speeds.but I do have a 350 with stock 77 fj40 tranny and transfer case. put in a flex fan at the end of last summer runs 185 and the hottest was 200 on 95 degree day with stock radiator and no shroud but alluminum one is being made.
 
Summit makes a great aluminum radiator that practically bolts right up. Just make a new bottom tray and two brackets for the top. Ill look up the part # if you want. I think I paid $230 with shipping.
 
Oh yeah, and I'm not sure of the con's but just welded up last weekend and will let you know how it is after Cruise Moab.
 
We've been running welded rears for years with no problems. If it's your daily driver and you are worried about tire wear don't do it. Otherwise, let the sparks fly!
 
got lock-right up front with welded rear. Have a taurus fan with the SBC. I never get above 190 with a 180 stat. Welded rear with my 36" TSL/SX tires and love it. It is more predictable than the lockright in the rear was and love the traction.
 
You weld the side gears and the spider gears together. That way both wheels have to turn at the same time even if one gets up off the ground. As for taking it out I dont know if you even could. Once they are welded in there I don't know how you could cut them out. Maybe torch them out but you'd have to cut through where you welded the spiders to the sides. It would probably just be easier to get another diff. Thats why I have 2 full third members in case something happens to the welded one I have a backup.
 
You can upgrade to a carrier locker like a detroit or an ARB. Once you weld it, going back to a lunch box locker like Lock-Right isn't really possible. You might be able to dremel the welds out, but I would recommend that as much and home dentistry with a dremel. It would get it done, but would hurt like he**.
 
You can also fill the gaps between 3 teeth on each side gear with weld metal. This will allow the spider gears to travel part way around the side gear before locking up. By doing this, you have a welded rear end with a slight amount of play so less likely to break something and it's easier on the tires. Eventually the gears will deteriorate and you'll have to replace the side gears and spiders. But, I don't know anyone who has welded their diff and not had to re-do it or replace because of breakage within 5 years.
 
This would make it more likely to break things, not less. It would not prive any appreciable gain in drivability as this is not enough play to alow differntiation in a turn. It is enough slop to let things inside take a lot of shock loading when you break a tire free.

Mark...
 
Mark W said:
This would make it more likely to break things, not less. It would not prive any appreciable gain in drivability as this is not enough play to alow differntiation in a turn. It is enough slop to let things inside take a lot of shock loading when you break a tire free.

agreed....my rear diff is welded solid, per the writeup in the tech links...no problems.

the shock load of welded teeth has busted every diff I've seen it done to....

You do NOT weld the side gears to the carrier itself, this would allow you to potentially cut free the welded gears and install a lunchbox...not that I'd bother, since carriers are fairly plentiful, but it is possible...
 
I started by filling in the gears with weld material and the 1st time I spun the tires I thought there was enough freeplay to really shock load stuff. It just didn't feel right.

All of my spiders and side gears are welded together now.
 
Miller locker

I would follow Woody's write-up to the "T". Don't do like I did; try to weld the interior of the spiders :whoops: . A lot of work grinding and filing it out to fit the spacer back in :doh: I tried to find a spool w/ no luck. I even sat on the phone w/ Jegs & Summit. My welded rear works great. I have the ever loud barking dog in the back when I make a turn in the gas station parking lot w/ tire tracks all over the ground. It performed awesome last weekend @ the Con' in the snow. Not a problem to date. Unless you have the money for a Detroit or an ARB. I too carry an extra 3rd' and both rear axles for the chance something goes wrong on the trail in my trail fix tote.
Good luck,
Campy
 
could someone post up some pics so i can see exactly what to weld? thanks
 
I am going weld up a minitruck rear for a freind this weekend I usually weld the side gears to the carrier as well as the spiders. This will be my first Toyota weld up and I am looking forward to doing it on the workbench rather than on the vehicle. I have only welded Dana axles before. I like driving a welded rear better than driving a detroit locked rear. Borrow someones short Cj-5 or zook with a detroit and have fun keeping it on the road!
 
Back
Top Bottom