Webber 38 jet size?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Trollhole

THC
Supporting Vendor
Moderator
Joined
Mar 6, 2005
Threads
1,565
Messages
21,212
Location
Mauldin, SC
Website
forum.ih8mud.com
Been having a rich issue with the 38. Running a 2f with headers.

I ordered a jet kit from MAF.

I'm puzzled by the jets I pulled out of the carb. Main were .155

and idle jets were 55.

The kit didn't even come with jets this big. Biggest were .150 main and .050 idle jets.

I swapped out idle jets to .050 and mains to .150. I changed the idle jets out only because my idle adjustment screws were only half a turn from being all the way in.


So what is everyone else running for jet size for almost sea level carbs?
 
weber jet size

im running mains 155
idle 60
air corrector 180
im at sea level still runs rich but i think that webers are that way
 
Well I'm running way to rich. 8 miles to the gallon to rich. I have a air fuel meter running and even with the .150 mains and .050. I'm still running rich. I just wanted to know what other were running before I went to the .145 or .140 mains.

And It is my understanding the air corrector jets only help to dial in small changes.

With the smaller jets it still runs the same if not better.
 
Back
Top Bottom