Vintage Air Install...

[jdog35]

Hey all. Quicky question on a Vintage Air install. Do I need to fab my own brackets for the interior evaporator to mount on the inside? I'm trying to piece together all these parts that came with this rig, and the aftermarket A/C seems to be almost complete. I get the feeling I'm supposed to fab my own brackets though for the interior mounting. Thoughts? Experiences? Photos? All are welcome and much appreciated!!!

Thanks guys/gals!!!

Oh...and it's a Super Gen II by the way.

 

[Deathoncall63]

watching

Considering I have no A/C, I will be watching this thread as it forms. Hopefully someone pitches in some knowledge

 

[Luke111]

Vintage Air

Check out my build thread, I had the Gen II system installed and the fit between the dash and the trans hump was so tight it only required a L-bracket and one screw in the firewall to hold it in place. It also gets a little help from the hoses that attach to the firewall plate. I don't have detail pictures of the bracket but it was pretty straight forward.
The hard work was running hoses and hardlines in the engine bay, the complete install was done by IronPig Offroad.
One thing that was helpful was aluminun duct tape in attaching the hoses from the unit to the vents....seals well and is very sticky.
You'll have to get creative with the defrost vents, I went to Home Depot and bought different styles and sizes and spliced them and sealed everything with the duct tape,

Lou