Its possible to examine the articles in Victoria M-F according to the site. The one TIG is over $6K new.
VI: Buy/Sell/Trade, In Search Of
- Thread starter bikersmurf
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Thread starter
- #862
It is. They are going to be closed some days coming up to Christmas. I'd call ahead. They looked to be well taken care of based on a visual inspection. Hard to tell much without power being connected.
They had at least 20 in the storage area... I was curious where they were from but didn't see any obvious labels.
They had at least 20 in the storage area... I was curious where they were from but didn't see any obvious labels.
Those Syncrowaves are great machines. So is the smaller Lincoln. I have an inside line and can find out more about the machines if anyone wants. Im sure I can find out where they came from and if they work etc.
If the prices get too high I still have my old TIG for sale.
If the prices get too high I still have my old TIG for sale.
stevebradford
In the shop
Somebody is looking for fj60 parts but they don't say what ones.
$1,234 · LOOKING FOR FJ 60 LANDCRUISER PARTS
$1,234 · LOOKING FOR FJ 60 LANDCRUISER PARTS
looking for some 60 spring pins for the fixed mount on the frame... they have the tear drop shape plate for the small retaining bolt
anyone have any spares... also still looking for a front seat..
anyone have any spares... also still looking for a front seat..
JimJ
ATOYOHOLIC
Am looking to buy a pair of 60 series mirrors on drivers only, thanks!
JimJ
ATOYOHOLIC
and a good clean 60 series transfer case...
This muffler came with a bunch of other stuff when I bought my 1977 45. I assumed it was for the 45 until a few days ago when I was going to put it on. From SOR's website it looks to be for a late 70's 40, OEM style. Free to anyone that can use it. I can bring it in the spring when I head down to Victoria. Edit-- The muffler has been spoken for.
Last edited:
JimJ
ATOYOHOLIC
WANTED: If anyone has a super clean set of factory chrome Toyota 60 series rims let me know...
^^$2K?? That seems a bit rich.
- Thread starter
- #872
Perhaps it's in the wrong thread... For one that needs TLC 2k doesn't seem like a deal.
I know the normal auction price is about $750 to $1000.
Hey guys, cleaning out the garage and have a bunch of 80 series stuff. NEED IT GONE BY THE WEEKEND.
-Stock height Coils, front and rear - SOLD
-Front rear stock shocks - SOLD
-Gas tank with skid and straps - 30
-Fuel pickup with fuel pump (1fZfe) - 50
-LX450 Side steps - 20
-1FZFE CPU - 50
-Driveshafts, front and rear (1FZ w/auto trans) - 75
-Rear Heater and blower -20
-DEPO Headlight, RIGHT side only - 40
-Shifter and console LX450 brown
-Transmission Cross Member
-RHD HDJ81 Master brake cylinder - 40
-RHD HDJ81 Wiper motor - 30
-bunch of electric bits from the cowl harness of a 93 HDJ81
A750 auto trans for rebuild - 50
-Stock height Coils, front and rear - SOLD
-Front rear stock shocks - SOLD
-Gas tank with skid and straps - 30
-Fuel pickup with fuel pump (1fZfe) - 50
-LX450 Side steps - 20
-1FZFE CPU - 50
-Driveshafts, front and rear (1FZ w/auto trans) - 75
-Rear Heater and blower -20
-DEPO Headlight, RIGHT side only - 40
-Shifter and console LX450 brown
-Transmission Cross Member
-RHD HDJ81 Master brake cylinder - 40
-RHD HDJ81 Wiper motor - 30
-bunch of electric bits from the cowl harness of a 93 HDJ81
A750 auto trans for rebuild - 50
Last edited:
GTSSportCoupe
2LTE abuser
What is the transmission out of? If it's from a FZJ80 isn't it an A343F?
I'll take the coils, I can come by on Friday or the weekend
- Joined
- Oct 12, 2016
- Threads
- 9
- Messages
- 260
- Location
- Lower Vancouver Island bc
- Website
- www.mapleroseexplorations.ca
FJ40 Sell List . BLOWOUT ALL ITEMS MUST GO!!!!!
- 2F motor. Has either a spun bearing or a thrown rod. Willing to part out but would much rather just sell the whole thing.
- 4spd. Excellent shape. Shifts great.
- Upper front fenders. The part between the fender and the hood.
- All trim/logos. I new bought replacement pieces so the existing ones on the truck are up for grabs.
- Hood and windshiels latches. I bought new ones so again the originals are up for grabs. They are in good shape and work well. Just some spot rust
- Edic for a 3B
- Looking to trade the original 3B airbox for a Donaldson canister type.
So far thats, thats, thats all folks.
- 2F motor. Has either a spun bearing or a thrown rod. Willing to part out but would much rather just sell the whole thing.
- 4spd. Excellent shape. Shifts great.
- Upper front fenders. The part between the fender and the hood.
- All trim/logos. I new bought replacement pieces so the existing ones on the truck are up for grabs.
- Hood and windshiels latches. I bought new ones so again the originals are up for grabs. They are in good shape and work well. Just some spot rust
- Edic for a 3B
- Looking to trade the original 3B airbox for a Donaldson canister type.
So far thats, thats, thats all folks.
Last edited:
Hey Littlejohn, does that edic work??
- Joined
- Oct 12, 2016
- Threads
- 9
- Messages
- 260
- Location
- Lower Vancouver Island bc
- Website
- www.mapleroseexplorations.ca
I believe so. GSB15 bought the trans and motor off of Keith, who's tag I don't know, for me while I still lived in the bush when it came up for sale, in anticipation for the build. I've never used it but I believe it is still operational.
