Valve cover re-do

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 30, 2005
Threads
20
Messages
123
Location
Sussex County, Delaware
I'd like to clean this up while it is off during the head-gasket job. If I paint it, do I just use a degreaser, primer, and the paint I want?

If I go with the factory look, what can I use to enhance the appearance?

So far, I'ved used a degreaser and polished a bit with "Mother's power wheel" but the cover still looks like crap.
DSC_0190 (Small).webp
DSC_0191 (Small).webp
 
I would be looking for a powder coating company in your area. They will clean and prep it. You can choose from many colors and designs.(thinking neekid ladies:grinpimp:)
 
You could have it media blasted. It will remove all of the contaminates and you'll be left with a like-new look. It looks like you would be well served in taking a brush and scrubbing it with some simple green. Take the plastic spark plug wire looms off first and have at it. I just did this to mine.
 
I had mine bead blasted then powder coated. It looks great, cleans well, and has been very durable. I paid around $75.00 2 years ago.
Turbo 2.webp
 
LOL... Talk about blinged-out..... I have even been known to Armor All my XL's. Powder coating the valve cover was prior to the turbo. I like the fact that when you open the hood they don't mistake the 4.5 for either a V6 or V8.
 
i don't have any pictures of mine, but i cleaned my valve cover up really well when i replaced the valve cover gasket. Then sprayed it with the rustoleum hammered finish black. Then painted the lettering yellow. I think it turned out pretty well.
 
I called several auto-body shops in my town today and asked about having the valve-cover powder coated. They all said, "Sorry, we don't do that, but calll this guy in the next town over."

That guy wants $125 to blast and paint it. Plus, it will take until next week.

While I am not rushing the project, I don't want to tie-up the guys putting the head back together. Hmmm....starting to sound like a trip to Wal-Mart.

Sorry...failed to say that the pic's above do look great!
 
Last edited:
I recently painted mine. I called the local automotive paint store and they recommended painting it with 'Bulldog Adhesion Promoter'. I cleaned it up good with a scotch-brite pad, painted it with the Bulldog stuff and then I painted it with Duplicolor 'aluminum' engine paint. Not so bling-bling, but looks nice and close to stock.
June16 024.webp
 
I had mine bead blasted then powder coated. It looks great, cleans well, and has been very durable. I paid around $75.00 2 years ago.

Where's yer hood?

:grinpimp:
 
This was just after getting the turbo on Dan. The hood is on now.
 
Sand blasted it, powders coated then after you can add high gloss clear coat to any color for added protection.

I had mine bead blasted then powder coated. It looks great, cleans well, and has been very durable. I paid around $75.00 2 years ago.

This was just after getting the turbo on Dan. The hood is on now.

Guys, maybe the next mod to come is Ferrari-like...you know, glass hood to expose the bay?

I called another paint shop to inquire about their service. They won't bead blast it because of the baffle. I was told "da gr'it get stuck in dar and just ter dat mot'rup."

That's enough! Sounds like a DIY job for the 4th!
 
I can't see any blasting medium getting into the underside of the valve cover if they do a good job of taping the oil filler hole, the PCV inlet and the underside of the cover. I had no issues with any loose blasting material that I could see. I would have it done at a Powder Coating specific company that has done specialty items in the past. A body shop, IMHO, is just used to working with vehicles, not specialty items.
 
I'd rather have a shop that tells me they don't want to do something because of potential problems even if unlikely than the other way around...
 
Cover update..YO or no?

I shot the cover with Dupicolor High-Temp Gloss, then used a Dremel (sanding drum attached) to reach the Al.

When I asked my wife what she thought of the project, she said "YO is American, not Japanese."

Hmmmmmmm, this comes from a lady that was born in England, raised in Japan, and is now an American citizen.

Maybe this will get tossed to chat, but what do you folks think about the DIY project? (Please note: the pics were taken right after sanding, so some dust is included.)
DSC_0046 (Small).webp
DSC_0040 (Small).webp
DSC_0036 (Small).webp
 
Back
Top Bottom