Valve Chatter

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Doesn't sound like my sewing machine
costumed-smiley-007.gif
I can hear the air pump chuffing but no valve noise....
 
Its better they make some noise, than get tight and wreck your valves... Mine chatter away and in fact i keep them slightly loose on purpose. My mechanic suggested they may have become domed slightly so my gap is actually bigger than i think. He has come across old cruisers that are so worn they punched holes through his feeler gauges! so mines obviously not that bad!!!

I did notice during my last trip (11,000km round trip driving 8hrs/day) that everything quitend down a fair bit, this may be improved oil flow nocking the sludge out of the jets, or that i upt the amount of upper cylinder lube i put in the fuel (lead replacement)

Still gets mistaken for a tractor though!

Hope my ramblings help!
 
Last edited:
Went back in and re-adjusted - surprisingly some were loose and others were a tad tight. Drove it around after the adjustment and with it warmed up, the engine is smooth and quiet at ALL rpm's now - the way it should be.

I also realigned the rear driveshaft as it was out of phase from the PO. Much smoother on the road now.

Now I can focus on the paint.
 
Back
Top Bottom