Valve adjustment - While I'm in there...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 30, 2006
Threads
103
Messages
3,952
Location
Utah
Anything I should take a close look at while I have the valve cover off?

Also, what's a good way to clean the rockers and such? They're pretty dirty.

One more thing....any ideas for a color to paint the valve cover? NOT like Trollhole's infamous Big Gay 2F... :rolleyes:
 
.........One more thing....any ideas for a color to paint the valve cover? NOT like Trollhole's infamous Big Gay 2F... :rolleyes:
Pink - paint it pink. Her name is Katie, right? Then when it's running, it'll have a "hot pink" valve cover - literally! Makes sense to me.:grinpimp:
 
What's wrong with the color of the valve cover from the factory?

This one looks decent to me.

3004619660_66b76b51e1.jpg
 
Pink - paint it pink. Her name is Katie, right? Then when it's running, it'll have a "hot pink" valve cover - literally! Makes sense to me.:grinpimp:

:lol:

Here's a few before/after shots. There is some pink, but she's not that girly :D

7935_280393960227_539070227_8855705_6992834_n.jpg

7935_280393970227_539070227_8855706_3513536_n.jpg

7935_280393985227_539070227_8855709_7363530_n.jpg
 
You should have painted the valve cover a color that would blend in with dirt better. Now it stands out too much :) In all seriousness though, good job, clean the rest of the engine bay now ;)
 
Totally jelous. I wish I would have painted my valve cover when I had it off. I should do a valve job, since its never been done, then I'll have a good excuse to paint the cover. My choice would be yellow, since thats what I've painted everything else.

Good job though. Is there anything to worry about when doing a valve ajustment on an engine as old as ours? Mine has never been done and I hate to touch something so well mated, for so long? Or am I just being paranoid?
 
Truth be told, it runs slightly better. Though it ticks a bit louder now... :confused:

Also, for those of you wondering, it is a PAIN to get the cover back on without dropping the new gasket a few times :doh::censor::bang::censor:
 
Last edited:
did you clean the rockers while you had it open?

No I didn't. Couldn't find anything to clean them with that wouldn't dissolve oil or result in crud getting lodged in oil passages.
 
My valvetrain was just as disgusting too when I replaced my valve cover gasket. Is this something that is normal for the 3FE? Is all that buildup harmful?

2F's always seem to come out clean, the 3FE's tend to have more build up?

Anyone shed any light on this?
 
Back
Top Bottom