Trying to upgrade horn

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 15, 2005
Threads
65
Messages
346
Location
Charlotte, NC
Ad everyone knows, the factory horns on the LCs sound pretty wimpy. The horn on my wife's 2004 Sienna sounds much better. I thought to myself, maybe I could order a set of these for my truck. Since they have the same 12V connection, I figured I would see if the Sienna horns would work on my LC. I hooked everything up, but the horns from the Sienna will not work on the LC. The connections are exactly the same and they are both 12V systems. When I put the factory LC horns back on, they worked fine. Am I doing something wrong? Any reason why the horns wouldn't be interchangeable?
 
Am I doing something wrong? Any reason why the horns wouldn't be interchangeable?

Yes, you must be doing something wrong. The horns should be interchangeable. Look up prior threads using the FIAAM (or is it FIIAM) horns. Their "Freeway Blaster" series is a dual tone (High/Low) and available for ~$15 at Pepboys, AutoZone, and other retail outlets. Some like the Hellas and some like the Hella air horns though the air horns are a bit more complex to install.

-B-
 
Last edited:
This may sound stupid, but did you bolt the sienna horns to your LC, or at least have them grounded to the chasis when you tried?

Actually, no, I did not have them bolted. It must've just been the ground. I connected the wires but left the horns sitting there not attached to anything. I'll try it again this weekend and see if it works.
 
98 Snake Eater has a thread about his horns. Really nothing else is worth discussing once you see and hear what he has dun...:eek:



LOL


Just wait till you see the horns on the golf cart ;)


Actually, no, I did not have them bolted. It must've just been the ground. I connected the wires but left the horns sitting there not attached to anything. I'll try it again this weekend and see if it works.


Yeah, the definitely need to be grounded :doh:
 
Definately the ground (or lack thereof) if you didn't bolt them up. If you're in a hurry, you can always do what I did and just hold the horns in your hands while resting your hands on the frame :doh:

Hurts a bit - maybe have your neighbor do this while you hit the horn pad :D
 
If you really want loud try Hella Supertones - 118db. I have these on my WRX and my problem with getting noticed by the big rigs has gone away. They have saved me on several occasions.

Good luck with the install and check that ground.
 
Ad everyone knows, the factory horns on the LCs sound pretty wimpy. The horn on my wife's 2004 Sienna sounds much better. I thought to myself, maybe I could order a set of these for my truck. Since they have the same 12V connection, I figured I would see if the Sienna horns would work on my LC. I hooked everything up, but the horns from the Sienna will not work on the LC. The connections are exactly the same and they are both 12V systems. When I put the factory LC horns back on, they worked fine. Am I doing something wrong? Any reason why the horns wouldn't be interchangeable?


I'm among those who thinks the LC horn sounds wimpy but it sure is heard when you use it, no question. Don't under estimate it, others on the board may know more.
 
Back
Top Bottom