True lift height

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Original & now pictures

Here are pictures of my truck, as I bought it, and now with 6" Ironman lift and LT365/75R-16 BFG MT KM2 tires (36 1/2").

original-sideview.webp


DV13-sideview.webp
 
1997 Lexus lx450, 135k miles, stock with rear seats and nothing inside the car:
19.5" rear
19.9" front



image-3366933801.webp



image-1171345342.webp

1997 lx450: 135k miles, unlocked, packasport

image-3366933801.webp


image-1171345342.webp
 
25" Front with 2" MT Spacers 3.5" OME J's AOE Front Bumper and 12k Winch
25" Rear with 3.5" OME J's, Stock Bumper, No Spare, just Turbo:p

DSC00036.webp

DSC00037.webp

DSC00026.webp

DSC00036.webp


DSC00037.webp


DSC00026.webp
 
Can anyone weigh in with numbers for 80s without flares? I just bought an 80 with an OME suspension under it but I don't know if it's stock height or a lift.

Measurements: center of hub to bottom of flareless flare

Front: 22"
Rear: 23"

 
Can anyone weigh in with numbers for 80s without flares? I just bought an 80 with an OME suspension under it but I don't know if it's stock height or a lift.

Measurements: center of hub to bottom of flareless flare

Front: 22"
Rear: 23"

The flares only stick down lown less than .25" old 20 year old springs generally sit a 20" in stock form. Without counting turns of coils, thickness of wire or color, it looks like a 2" lift. Stock front bump stop gap is 1.5"
 
Last edited:
The flares only stick down lown less than .25" old 20 year old springs generally sit a 20" in stock form. Without counting turns of coils, thickness of wire or color, it looks like a 2" lift. Stock front bump stop gap is 1.5"

Thanks for the reply! When I put the 35s on there, it seemed like the truck might have been lifted. Is there a way yo be sure by measuring wire thickness? It would be nice to confirm.

EDIT: I just checked the front bump stops and it looks like just over 3"... maybe I have a 2" lift after all? (truck was billed as having a stock height lift when I bought it)
 
Last edited:
Stock, no 3rd row seats. Front OME 851. Rear OME 862 + 15mm of packers. Both measure 21.75" hub center to flare . I've had the springs for 16 years/180,000 miles with no noticeable loss of height.
 
FSM way to stock height.
bumperstopper.webp
Screenshot_2017-02-23-11-32-48.webp
 
Thanks for the info @GW Nugget ! I counted 9 wraps on my front spring and, with just over 3" of space between my front bump stops, I think my front coils might be 850s which, from what I've read, should be a 2" spring! I think my front suspension mystery is solved. Also, based upon your feedback, I think my rear is an 860. When I get home from work, I want to confirm that as well. The information you've given me solved this one quick. Thanks again!
 
@Lumpskie Check Slee's site, you have the "stock" OME setup which gives you 3/4" more ride height. Just FYI!

You would know! Don't my measurements aeem like it rides high for stock height though? I got 22 front and 23 rear...
 
@Lumpskie Check Slee's site, you have the "stock" OME setup which gives you 3/4" more ride height. Just FYI!
I had a 21.5" center hub to bottom of flare on my rear 862s plus 30mm spacer.
He defiantly do not have OME stock replacement springs.
Minus 30mm just springs would be like 20.3" ish........
 
Back
Top Bottom