Trail Tailor Offerings

[TRAIL TAILOR]

Coil conversion 60 frame is back from powder coating and reassembly has begun.

 

[TRAIL TAILOR]

Ready for brake and fuel lines. New OEM body mounts and 40 gallon custom aluminum tank...

 

[TRAIL TAILOR]

Long morning alone, but done. I'll let it sit for a few days and then get the body set. The chassis is waiting to be reunited with this red head beauty!

All alone again, so setting up the shop for solo operations. It's clean for a day or two.........

Next up a custom 40 gallon LS swap tank, 100 SAS custom front axle and bringing the 60 and K10 chassis jigs back in for 2 more custom 60 chassis and to finish the C10 to K10 chassis.

 

[TRAIL TAILOR]

40 gallon tank is welded out. I'll get this on a 24 hour water test in the morning.

I use 12 ga steel on my tanks and install a sump as well on all LS swap tanks.

Jason

 

[TRAIL TAILOR]

And back to chassis builds.

2- Trail Tailor builds for FJ60s
1- K10 custom for SWB

Blue Tundra build is in the small shop to finish out the interior.

 

[TRAIL TAILOR]

Getting some interior work in on the Tundra build. Should be close to finishing the carpet and door panels tomorrow.

 

[MANUCHAO]

that black interior ceiling looks awesome !!

 

[timexlost]

Mmmmm…. Black, like my heart.

 

[cliffrdavis]

Got my Trail Tailor sliders and bumper installed this week. Got it registered and titled after a lot of suspension, steering and brake work. It’s street legal now!

 

[TRAIL TAILOR]

Got my Trail Tailor sliders and bumper installed this week. Got it registered and titled after a lot of suspension, steering and brake work. It’s street legal now!

View attachment 4140511

View attachment 4140513

Looks awesome Cliff! Thank you for the orders.

 

[TRAIL TAILOR]

Almost done with the blue Tundra swap build. Just need to clean up and tidy this one up.

Then it will be for sale.

 

[TRAIL TAILOR]

Another extended range tank finished up... 3 more to go.

Set of sliders and started another custom 60 chassis.

Breakfast with @Butt Ugly Chuck always a good time and to catch up on the weeks events.

 

[WSOPgold2012]

Yes please!!!

 

[TRAIL TAILOR]

The 60 Series rear seat latches (aka "snickle latches" )are now in stock. Thank you again @Snicklephritz87 for originally making these and letting me continue on making them for the cruisers.

60 Series Aluminum Rear Seat Latch Replacement Set

Toyota Land Cruiser 60 Series 61 Series 62 Series CNC milled from 6061 aluminum Hard black anodized coated Set includes both driver and passenger sides

www.trail-tailor.com

 

[TRAIL TAILOR]

Getting another chassis set up.

@Butt Ugly Chuck came by to help me mate the transmission and tcase up and get it pre-set in chassis. Thanks for always lending a hand on Saturday mornings!

Transmission crossmember is made and will get the MagnaFlow exhaust set up to check clearances before sending off to powder.

 

[clrussell]

Tr4050?

 

[TRAIL TAILOR]

A notch on the trans x-member and this portion is good to go. Need to do some re-routing on the rear coilover and link for clearances.

 

[TRAIL TAILOR]

Single swing arm rear almost done.

 

[TRAIL TAILOR]

Another chassis is in progress. Ready to flip and weld the underside of this one and then two more to go.

 

[TRAIL TAILOR]

2 down... 1 more to go.

@Butt Ugly Chuck working with me for a few days. Stripping down this chassis to coil convert and add 80 axles, ARB lockers, LS3, Nomad wheels, Toyo tires, 4L65E and new splitcase, 40 gallon tank and new Woods driveshafts.