TOYOTA PIC OF THE DAY POST (4 Viewers)

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

It’s a secret! That’s about 50k ~ northeast out of Christina lake. 1k long tunnel with a bend in the middle you can’t see any light. It’s also caved in a few times the last few years and smells of rat in there.
IMG_0297.gif

IMG_0382.webp
 
photo-1470_singular_display_fullPicture.webp

On the way up… :)
photo-1475_singular_display_fullPicture.webp

After loading up some 40 parts…
photo-1480_singular_display_fullPicture.webp

Glad I was on the way home… about 11:30 am.
 
I’m finally getting the brakes working properly now that I have new callipers and pads on all 4 corners, and have pushed about a litre of brake fluid while bleeding (&flushing) the brakes.

I was surprised when I got to the grocery store and found this can still sitting on the fender.
IMG_8768.webp

I’d put it down while loading our older dog in and forgot about it. It didn’t get blown or shaken off in the 2.5km trip. I must have done something right with the suspension… it certainly isn’t the 30ish year old Rancho 5000 shocks. ;)
 
@seapotato do you have anything to do with the reason a can won’t slide off the fender? Some rare form of magnetic field to avoid spilling wobbly pops?
 
@seapotato do you have anything to do with the reason a can won’t slide off the fender? Some rare form of magnetic field to avoid spilling wobbly pops?
The flat surfaces on a 40 are irresistible.



Once made it to Ladysmith from downtown Nanaimo with 3 beer bottles on my fender and another couple on the bumper.

After that, I started doing a quick walk around before leaving for work at 5 am, because it wasn't just me leaving them there. ****ers 🤣

Again. Irresistible flat surfaces.

Would have been embarrassing if there had been anyone around at that hour when they all fell off and shattered at the lights...

And probably expensive if it'd been a Mountie

( For the record, I wasn't drunk or even hungover, just didn't think to check when climbing into the truck in the dark.:doh: )
 
The flat surfaces on a 40 are irresistible.



Once made it to Ladysmith from downtown Nanaimo with 3 beer bottles on my fender and another couple on the bumper.

After that, I started doing a quick walk around before leaving for work at 5 am, because it wasn't just me leaving them there. ****ers 🤣

Again. Irresistible flat surfaces.

Would have been embarrassing if there had been anyone around at that hour when they all fell off and shattered at the lights...

And probably expensive if it'd been a Mountie

( For the record, I wasn't drunk or even hungover, just didn't think to check when climbing into the truck in the dark.:doh: )
I once left a gallon sized pot, with a tomato plant in it, on the back bumper of the ambulance. I was about 10 minutes down the Pat Bay highway before I remembered and pulled over and took it off the bumper.
 
Hmmm, one could be accused of a VIN swap!
 
Conversion to s***ty 1982 bj60 is almost complete 🤣🤣


Renewed insurance yesterday. Still says RHD...

Didn't exactly have the brightest spark doing the paperwork so I didn't say anything. Probably needs an inspection to correct that.

Not a can of worms I felt like diving into.
Find some paste eater and tell them it was an error... you don't have any idea why it says RHD... take a look at it in the parking lot, it's clearly a LHD... Mistakes are made all the time. Like when they entered all the digits on my odometer... and when I reinsured they said the mileage was lower than it was last year. Fortunately I had the email & picture I sent them and they were able to "correct" the problem. Now and forever more, all the digits (including then 1/10ths) must be entered and they don't know how to correct it.

If it requires an inspection, find a shop that won't give you grief about it.

RHDs are usually more expensive to ensure than their equivalent LHD counterparts.
 
Last edited:
IMG_9038.webp

New cars are looking too similar…
IMG_9036.webp


Or is it just me.
 

Users who are viewing this thread

Back
Top Bottom