Too loud

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Sep 22, 2013
Threads
56
Messages
481
Location
48.493445, -116.881603
Website
www.orttauq.com
I just had a new 3" built when I got a new supercharged 4.5 put in. :cheers: Magnaflow cat, muffler, and resonator all in the factory locations.

Anyway it is too loud for around town/neighborhood so I want to get this along with a second VERY quiet muffler. Would wire it to the POWER so when I depress the POWER (this is real now that I has the supercharger) it runs just the resonator and when the POWER is off it is through the VERY quiet muffler.

What y'all think?
 
Sounds like you're over-complicating the hell out of it. This is NOT a sport truck. Just re-do the exhaust to the quiet version. It will cost less than what you're looking at doing.
 
Yes its possible. The other possibility is using a 60 or 66mm Westgate and plumbing it to a vacuum port so that it opens at a specific boost. For example, nice and quiet cruising around town, but floor it at the wastegate opens when you get to say 3psi and more noise. lol
 
Yes its possible. The other possibility is using a 60 or 66mm Westgate and plumbing it to a vacuum port so that it opens at a specific boost. For example, nice and quiet cruising around town, but floor it at the wastegate opens when you get to say 3psi and more noise. lol


He wants LESS noise.......
 
And he would have it running through the quieter muffler and then when boost opened the wastegate it would run through the loud setup.

He wants LESS noise.......
 
I have a 3"exhaust coming off of a cx header, off of my supercharged 1fz. I originally had a generic turbo muffler and it was way too loud. I went with a Walker Quietflow muffler and a 12" resonator at the tip. This setup works almost perfect as it's reasonably quiet cruising around and it barks pretty good standing on it. I love inline six engines and enjoy the sound when they are making power.
 
I have a 3"exhaust coming off of a cx header, off of my supercharged 1fz. I originally had a generic turbo muffler and it was way too loud. I went with a Walker Quietflow muffler and a 12" resonator at the tip. This setup works almost perfect as it's reasonably quiet cruising around and it barks pretty good standing on it. I love inline six engines and enjoy the sound when they are making power.

I've had similar experience with 4.2 turbo diesel in HDJ81, and a turbocharged HZJ105.
HZJ105 has a full flow 3"x 14" x 9" round muffler at the rear tucked up on the inside of the chassis rail. It does a good job of shutting it up with no reduction in performance.
 
Thanks all...just what I needed! Ideas. The Exhaust shop put the resonator inside the frame next to the spare so I am thinking of putting the quiet muffler next to it outside the frame. With the suggestion that @scottryana makes it could work AND no input from me....on demand is even better .
 
No, it is not a sport truck but I do tow a fairly large boat AND have to not make enemies of my neighbors. Quiet at home and able to breath on the climb from Vantage to Ryegrass on I90 and over the Pass.
 
Yeah it's an old turbo trick, a lot of guys want that sleeper sound until they are on it and then want to get loud and have it bypass the exhaust under boost.

You would be doing basically the same but with a quieter and less quiet section of exhaust. Haha

IMG_2538.webp
 
"And she purrs like a kitten 'til the lake pipes roar!"
 
This has become a real issue for me as the drone on the highway makes it no fun to drive any distance. I am giving up on the diverter/bypass idea -KISS-

Anyone have a suggestion for a high flow muffler to replace the Magnaflow? Walker Ultra Quiet?

Also I will have a :censor: Magnaflow muffler sale soon.
 
Last edited:
Back
Top Bottom