Thoughts on my bumper design (1 Viewer)

[Blade 80LC]

I forgot to mention. A few of you mentioned wanting a set of the frame plates I used for the bumper. Max at Dirtbound offroad cut them out for me and said he is willing on cutting them out for anyone who wants a set. He wasn't sure on cost yet and we still need to make a couple changes to the design now that I have built and installed the bumper. He might put together a plate and hardware kit to get you started. You would need to provide the tubing and bender. It would just be a good starting point for your own creativity and fab work.

Do you have any contact information for Max? I've tried a couple searches for Dirtbound Offroad. I'm not coming up with a fabrication shop in SoCal. I'm guessing you didn't get these from a Jeep shop in Minnesota.

 

[bhicks]

Do you have any contact information for Max? I've tried a couple searches for Dirtbound Offroad. I'm not coming up with a fabrication shop in SoCal. I'm guessing you didn't get these from a Jeep shop in Minnesota.

Max took his business to Minnesota a while back. The cost to run his business is Socal was way more than what he could do in Minnesota so he packed up shop and moved. I currently don't have a metal shop contact right now that can water jet out metal pieces. I will talk with my machinist today and see if he works with someone for water jet cutting. This is Max's site:
Home :: DirtBound Offroad You can see his address show he's now in Taylor Falls, MN

 

[RhinoFZJ80]

i'd be interested in the raw cad file and even pay for it.