thermostat housing

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 1, 2006
Threads
24
Messages
106
Location
Brunei
i kinda broke my thermo housing while i was trying to replace the o ring..:doh:

does anyone if the housing is same on any other toyota models? there arent many 40's here in my country. and if i did try ordering from the U.S. it would be way too expensive for shipping to Brunei

thanks guys:grinpimp:
 
Bad luck there Roddy1154. I had my first FJ40 when I lived in Kuala Belait in the late '70's. "Brunei" brings back memories of the jungle trips to Miri - before the road was paved.
There's got to be heaps of parts in nearby Malaysia and in Indonesia and even Oz. If you get stuck, let me know and I have contacts 4 you.
hewitt_pat@hotmail.com
 
really?! your first 40 here in brunei... wow, do you remeber what the plate number was? and what colour? it could still be running :)

i bet you must have worked for shell... right?!

yeah its really hard to get parts here.. am gonna try KK though.. but thats not gonna happen till next month!!!
 
1. I don't think anything else will fit the Toyota 6.......except if you find a Toyota forklift. Some of them ran the same engines as the LC.

2. Housing made of aluminum.

3. Best bet for shipping would be from US, parcel post. USPS heavily subsidizes some of their lightweight packages to stay competitive. Prolly less than $20 to ship thru them.

4. Good luck.:)
 
yeah thats whats ive been told, but i did a bit of surfing and found these sites:

http://store.cyberweld.com/alel40.html

http://www.brazing.com/products/Weld_alum/

and i went to a local hardware shop n got an aluminum electrode, i dont know if its for another type of welding. but i gave it a shot.... couldnt get the stuff to stick! it didnt light up for more than a second:mad:

oh yeah, im abit new to welding:D so basically i dont know what ive been doing

has anyone heard of durafix repair rods?
http://durafix.com/index.html
 
How about this?

I've got a bottom, called the water house, that has one broken bolt, but it's otherwise good. You'll have to deal with drilling and tapping. You've got the two screw-in plugs, right? I don't.

PM me your address, and I'll check the shipping via US Postal.

You fool around with welding, and meanwhile I'll send what I have via the slow boat.
 
roddie1154 said:
any one know any good sites bout welding aluminum? i'm givin it another shot..
does aluminum require a larger current for arc welding?

I found that the housing welded fine using AC TIG and 4043 filler. It needs to be really clean too.

Aluminum welding needs about twice the current as steel. If you don't have the current, you can preheat the part to about 4-500 degrees F.
 
Back
Top Bottom