Build The Monkey is Back

Member Builds and Stories

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Any idea what purpose was of the reinforcement on the driver's side? Is there a 40 series in the museum from the JDM that has this wiper?
It has that fulcrum arm like some of the old Buicks did back in the day. That fulcrum mounts to that.

The BJ46 I nearly bought had that and I've seen a few elsewhere. The red BJ46 at the Land Cruiser Heritage Museum has it.
 
I know a member imported this BJ46 from Japan. RHD and a diesel but still would love to own it. A/C, Power Steering, H55 five speed and PTO winch. Can't remember if was an 83 or 84.
D23EE6DC-1EED-49AB-BA6F-74BC1D3C24E2.webp
226F8744-52A1-465C-88B7-ED4521799E0B.webp
 
That is exactly like the one I very nearly bought in Colorado, but it was just too rusty. I really love the forty 46 and I love a little metal flares on the rear wheelwell.
 
That is exactly like the one I very nearly bought in Colorado, but it was just too rusty. I really love the forty 46 and I love a little metal flares on the rear wheelwell.


Think those pictures are from at least fifteen years ago.

I noticed it did not have a FF rear axle or vent windows in the doors. Something I would correct on a FJ40.

Would agree, rust would be a big turn off. Spoiled being in AZ. Doesn't matter what screw, bolt or nut I remove on the 68 it just unscrews.
 
The other cool thing on the 46, which if you look closely at the grill you will notice, is that there is a reinforcement bracket along the grill that actually moves the front fenders out about 1/4". I'm not really sure what the purpose of it is, but I would like to have it just because it's cool. The 46 also had a little pocket on the driver's side rear fender weel behind the tyres, where the jack mounted; uber cool.

I made something similar to that for my HJ47 but I extended it up to my turn signals so that they wouldn't put any stress on the fenders on bumpy roads.

Totally agree about the full floater and vent windows. I don't know why the 46 didn't come with either of those in Japan.
 
Any 70-71 FJ40 that have a recovery in the center of the bench seat. Those also had a vapor tank in the right rear wheel well. That tank has a skid plate to protect it. That skid plate is a good start on making an enclosed section at the back of the wheel well. At least I thought it would years ago when 40s were easy to find in wrecking yards. Found a few of them a couple of days ago when moving parts. Wouldn't use the space for the jack. The 1/79 plus jack's location is fine for me. Have a few other ideas.
 
I've got a question for you guys. When I ordered new hardware for the headlight bezel (I think from City Racer) it came with some spacers that create a little bit of a gap between the bezel and the front, see pic below. Did they come from the factory with spacers and a gap, or no? Do you guys run yours with, or without the spacers and gap? Or maybe sand / shave them down to get the bezel closer to the front?

Bezel With Spacers.webp
 
Yes to the spacers. It keeps the bezel from chafing the paint off the grill allowing rust to get its teeth into your 40: that's bad unless you call it 'patina'.
 
If you could get this stuff in there it would do the trick too. And then if you soak the drum or any other rusty parts it comes out looking amazing! I've watched a lot of this guys really short videos showing tips that work, and then calling out the tips that do not work. I told Tim he needed a tank big enough to soak a whole 40 in it. Check this out:



Not sure when I can get to the tools I want. I did use and 2' prybar on a lug nut. While trying to tighten the lug nut used a hand sledge hammer on the drum. Doing this both side broke free to where I can spin them by hand. Just needed break the bond between the drum and shoes. Never thought rust was the problem. How hard they come off depends on how much of lip the drum has the part that inside of the shoes.
 
At work I tend to fantasize about driving my 43 across various landscapes with my son. I miss the West. Can't wait to get the 43 out here.

Another cool pic: the passenger plane graveyard in Vacaville.

20261117_144651.webp


20261117_152557.webp


20261117_152415.webp


20261117_155947.webp


20261117_152550.webp
 
At work I tend to fantasize about driving my 43 across various landscapes with my son. I miss the West. Can't wait to get the 43 out here.

Another cool pic: the passenger plane graveyard in Vacaville.

View attachment 4247541

View attachment 4247542

View attachment 4247543

View attachment 4247544

View attachment 4247545


I've done that too especially when flying (as a passenger) over Nevada and other states where you can see all the little dirt roads stretching out into interesting open geography!

Just gets you mind to thinking about what's out there and where's that go?
 
At work I tend to fantasize about driving my 43 across various landscapes with my son. I miss the West. Can't wait to get the 43 out here.

Another cool pic: the passenger plane graveyard in Vacaville.

View attachment 4247541

View attachment 4247542

View attachment 4247543

View attachment 4247544

View attachment 4247545
I think most of us do, you just have a better view!
I've done that too especially when flying (as a passenger) over Nevada and other states where you can see all the little dirt roads stretching out into interesting open geography!

Just gets you mind to thinking about what's out there and where's that go?
That's actually how all of this started for me, every bit of it. We would be driving out to ski in the 70's and my dad would wonder where those dirt roads go, but he never got to do it. He knew I would though!
 
My dad was born in Colorado and every winter we would make the drive from East Texas to Colorado and go skiing. Usually to Leadville and go ski at Ski Cooper (not Copper) because there were no lines. You'd ski down the mountain and ski right back to the ski lift and get on. It was great! It used to be the training mountain for the (if I remember correctly) military's 9th Mountain Division. Then I started helping bus tables and doing dishes, not getting paid, but doing it to help the employees get finished sooner and then they would take me with them on the employee only parts of the mountain down the far more difficult runs. Loved it! A few years ago dad lived in Colorado Springs, and every Friday during the summer when he got off work for the weekend he took his 4WD up into the mountains and camped and fished.

He will be 85 in February, and wants me to take him back to the mountains in the FJ40 and take him skiing for his birthday.
 
Quick eighteen hours at home, so I installed all of the packing around the doors. I also straightened out the header plate on the driver side. Abdullah the body man in Pakistan, whose nickname I understand translates loosely to 'one-eyed lefty', bent it to buggery. He was able to get it in with his great strength and determination. But I straightened it out and touched it up with fresh paint so it actually fits correctly. Now it slides right in as it should.



20261118_124804.webp


20261118_124609.webp
 
Quick eighteen hours at home, so I installed all of the packing around the doors. I also straightened out the header plate on the driver side. Abdullah the body man in Pakistan, whose nickname I understand translates loosely to 'one-eyed lefty', bent it to buggery. He was able to get it in with his great strength and determination. But I straightened it out and touched it up with fresh paint so it actually fits correctly. Now it slides right in as it should.



View attachment 4247692

View attachment 4247695

Does all the extra pieces of weatherstripping not found on earlier 40 help with wind noise at 75 MPH? My 40s are gear so weatherstripping won't help at those speed. I do have plans to match your gearing and tire size that would lower the RPM. I do have a few sets of door header with the extra piece that overlaps at the windshield.
 
It helps with wind noise and water leakage. Plus my LX had them all (the top had never been off when I bought it) and they make me smile.
 
@Chamba - watching the weather forecast this morning, it looks like your area is getting pounded again with rain and more coming for the next few days. Did you order the optional pontoon kit for your 43? I hope you don't get any water in the house.

@Living in the Past or anyone looking to reduce RPM at cruising speed, @brian has a pretty cool old mechanical overdrive unit tucked away not being used. Might be able to talk him out of it. If I remember correctly the spec sheet showed a 30% RPM reduction. It came with the 2F drivetrain I sold him, which he said is running like a top.
 
Back
Top Bottom