Builds TeCKis300 LX570 "FLX" Build (1 Viewer)

[TeCKis300]

How hard was the lc roof rack install? I would love a longer surface to mount stuff.

Probably the hardest part is to source one. Probably can find a good deal from the boards from someone that's upgraded their factory rack to aftermarket.

Like installing any rack, main things to pay attention to are removing the stock rack bolts, and not dropping the backing brackets into the headliner. Back the two bolts on each bracket in tandem, rather than removing a single bolt completely before the next.

The longer LC rack is infinitely more useful. I've always found the LX rack, and my previous LX470 rack, to come up short for just about everything - skis, box, home depot runs. Great mod!

 

[uzj100]

Noob question. Does the AHC override (extender) effect the ability of the vehicle to flex?

 

[tbisaacs]

Noob question. Does the AHC override (extender) effect the ability of the vehicle to flex?

Good question. I can tell you that I came back from Moab with the undercoating worn off the top of all four of my fender wells.

Zero issues burying the tires after AHC adjustment.

 

[TeCKis300]

Added a GFC Superlite RTT

GFC Superlite RTT Review

Finally found the RTT that works for my needs. Long time in the making, I ordered this in pre-production, back in Nov of '20, with promises of light weight, lithe profile/aero, easy setup, easy mounting, and semi-hardshell. All the things that my previous bookfold RTT (CVT Summit) was not, to...

forum.ih8mud.com

 

[themud]

I am setting up my 2011 similar to yours, but without the ahc lift. I do not intentionally wheel it. I only use it to hit my property that is 3 season accessible, but 4 if I use chains, and to any hunting spots I need to get to.

Question.
I am planning on arb front bumper even though it’s 200 specific it looks like guys are trimming to fit the lx. I am planning on dissent rear. Should I use suspension spacers for the extra load? I occasionally pull a quad, and landscaping chores, but no boat or camper.

Thanks,
Themud

 

[TeCKis300]

I am setting up my 2011 similar to yours, but without the ahc lift. I do not intentionally wheel it. I only use it to hit my property that is 3 season accessible, but 4 if I use chains, and to any hunting spots I need to get to.

Question.
I am planning on arb front bumper even though it’s 200 specific it looks like guys are trimming to fit the lx. I am planning on dissent rear. Should I use suspension spacers for the extra load? I occasionally pull a quad, and landscaping chores, but no boat or camper.

Thanks,
Themud

If no plans to sensor lift, AHC will handle the Arb bumper without issue. Even with a sensor lift, others have shown that AHC is up to task stock. Go for it!

 

[themud]

If no plans to sensor lift, AHC will handle the Arb bumper without issue. Even with a sensor lift, others have shown that AHC is up to task stock. Go for it!

Great thank you. It will hold front and rear?

 

[themud]

Great thank you. It will hold front and rear?

Sorry, it will hold with front and rear bumpers, plus swing out?

 

[tbisaacs]

Sorry, it will hold with front and rear bumpers, plus swing out?

You won’t even notice it

 

[themud]

Thanks.
I’m in Fort Collins. Will probably get some slee sliders with globe guards. Anyone near here as reliable as Bullhide 4x4?

 

[2014 LEX 570 GA]

Noob question, but does the stock LC roof rack just bolt right onto the LX? Also, what are you using to mount your max tracks and other gear on the rack?

 

[grinchy]

Noob question, but does the stock LC roof rack just bolt right onto the LX? Also, what are you using to mount your max tracks and other gear on the rack?

yes. be careful removing the bolts, loosen them alternately, do not take one all the way out with the other tight.

 

[TeCKis300]

Hitch swingout build V2

Swingaway Hitch Carrier v2

Second go at this, to build a swing away hitch carrier for overland camping. This time higher, tighter, and more tailored fit. Primary objective is to carry water and small loose items. What others may use drawers to carry. I can't commit to drawers as I use my 3rd row and need the utility...

forum.ih8mud.com

 

[TeCKis300]

Been toying the idea of an HWM. Perhaps fabbing up a hybrid winch bumper style cover.

Testing the waters aesthetically first with photoshop .

Getting more real and trying it on with vinyl

I think the look works?

 

[Itsky]

Looks good, I think I'm going to get a HWM pretty soon. Although I only used a winch once for real on my last truck, I do like the piece of mind.

 

[TeCKis300]

Looks good, I think I'm going to get a HWM mount pretty soon. Although I only used a winch once for real on my last truck, I do like the piece of mind.

Yeah, I'm thinking it's good insurance to have as the group of friends I run with gets into more technical stuff. Perhaps not so much for myself as the 200-series is just so very capable, but there's been a couple times we had to snatch others and a winch is just another good tool in the tool box.

 

[grinchy]

If your vinyl Covering the hwm maybe you can color match you body color?

 

[CharlieS]

If anyone wants a HWM for a '16+, I have one listed in the classifieds. I recently replaced it with a full bumper.

 

[TeCKis300]

If anyone wants a HWM for a '16+, I have one listed in the classifieds. I recently replaced it with a full bumper.

Interesting! Not sure it'll drop in with my '09 LX but maybe there's something there. Will hit you up.

 

[TeCKis300]

Build is done but never done? Is this forum the support group for our addiction? Thanks to @CharlieS , I need to install a winch now.